Community discussions

MikroTik App
 
kyob
just joined
Topic Author
Posts: 23
Joined: Mon Jun 05, 2006 4:48 pm
Location: Poland

how to reduce power consumption RB333?

Sat Nov 03, 2007 3:00 pm

my config RB333:
MT - 3.0RC9
3 x AR5413
all ports eth and wlan are in bridge
wireless connection is in bridge <===> pseudobridge
speed DL 4mb and UP 1mb
PPS ~ 400
powered by PoE

what I did
- 1 of 3 eth is ON
- 1 of 3 wlan is ON
- contrack is OFF
- no firewall rules
- eth and wlan in bridge

what else can I do to reduce power consumption ?

thx for any tips
 
galaxynet
Long time Member
Long time Member
Posts: 648
Joined: Fri Dec 17, 2004 2:52 pm
Contact:

Re: how to reduce power consumption RB333?

Sun Nov 04, 2007 3:22 pm

kyob -

The first most obvious answer would be to use a different RB....

Next is, if you are not using the other two WLAN cards take them out. Just because they are disabled does not mean that they are turned off... They are powered 'on' just disabled for use.

You could use lower power card(s), the R52 for example. Set the power out lower - just enough to meet your needs.

Connection tracking has really nothing to do w/power consumption... It does make the cpu work but the difference in power consumption is very small. Same for firewall rules and bridging - no help there.

I don't remember the complete specs -MT help out on this one, but I believe that the total power for the RB333 (cards and all) is something like 35 watts. The board itself I believe consumes a max of 15 watts before adding anything.
Thom Lawless
General Manager
RapidWiFi, LLC
thom.lawless [at] rapidwifi.com

Who is online

Users browsing this forum: Google [Bot], LSan83, UpRunTech and 71 guests