I have a perfectly performing test link that we're running that in winbox shows a link uptime of 11 days 39 minutes, when I run a print stats on the registration table, it shows numerous uptimes listed in the strength-at-rates field.
I ran the command a number of times and the uptime listed for 24Mbps is always less then 1 sec, yet it shows the current tx and rx rates are at 24Mbps and not changing at all.
does anyone know what the different uptimes actually mean?
Code: Select all
/interface wireless registration-table print stats
0 interface=wlan1 radio-name="STWR-5PTS" mac-address=00:0C:42:0C:9A:5B ap=no
wds=yes rx-rate="24Mbps" tx-rate="24Mbps" packets=476638203,330679402
bytes=1268671536,2324839753 frames=476638203,330682580
frame-bytes=2704590586,341103427 hw-frames=586909921,1983669661
hw-frame-bytes=3019985766,2176518514 tx-frames-timed-out=0
uptime=1w4d39m27s last-activity=0s signal-strength=-58dBm@6Mbps
signal-to-noise=42dB
strength-at-rates=-58dBm@6Mbps 0s,-60dBm@9Mbps 1w4d39m26s360ms,-
59dBm@12Mbps 1w3d23h52m6s30ms,-58dBm@18Mbps 3d2m14s650ms,-
59dBm@24Mbps 10ms
tx-signal-strength=-60dBm tx-ccq=100% rx-ccq=100% p-throughput=18146
nstreme=yes framing-mode=none routeros-version="3.0rc8"
last-ip=x.x.x.x 802.1x-port-enabled=yes
authentication-type=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm
compression=no wmm-enabled=no