hi.. i'm working in load balance depending on the destination ip but i can't make it work
i tried the example above but no luck. i use dst-addresslist instead dst-address because a have in address list, a list with the ip of sites i want to redirect to the alternative wan.
i've been reading all wiki examples and i arrived to a solution similar to the one posted above but no luck
my router has no mangle rules, because i use a traffic shapper in another pc... this router is only used for nat & firewall.
i have:
2 lan interfaces bridged
2 wan interfaces (wan1 ip 200.45.??.??/255.255.255.248 :: wan2 ip 10.0.0.2/255.255.255.0)
i want to route youtube through wan2
a squid pc conected to lan1
all clients connected to lan2
lan network=172.16.0.0/21
in ip/firewall/nat i don't use masquerade. i use scr-nat and dst-nat (i assign some public ip to clients)
i use a nat rule to redirect all packets to port 80 to the squid pc
i don't pretend you to give me the exact code, i just would like some guide, some general steps to follow... i'm lost
thanks in advance & sorry for my poor english