i have upgrade my router from 2.9.42 to 3.4. I have 350 pppoe clients. But in 3.4v, we dont find Tx & Rx rate in pppoe-->> Active connection list. So it's a problem for me to find out which user against which ip uses how much bandwidth.
But it has given in ppp-->interface list. But there is no MAC address & Ip address shown.
ppp--->> active connectin, does not show Tx Rx rate in V3
Last edited by raktim on Fri Aug 22, 2008 6:37 am, edited 1 time in total.
Re: ppp--->> active connectin, doen not show Tx Rx rate in V3.4
I AGREE! I find myself switching back and forth all the time now. I used to just be able to use the Active Connections tab to see all the info I needed, but now it is much more work. I would love to see the same columns added back in that used to be in 2.9.x.
Re: ppp--->> active connectin, doen not show Tx Rx rate in V3.4
Ver. 3.xx allow you to select the columns you want to see. Just right click in the appropriate windows and select "show columns"; then pick out the columns you want.
Re: ppp--->> active connectin, doen not show Tx Rx rate in V3.4
True, but it doesn't let me add "ip address" as a column in the interaces tab, and it doesn't let me add tx/rx rate on the active connections tab.
Re: ppp--->> active connectin, doen not show Tx Rx rate in V3.4
There is address menu in PPP active.
Where is the problem to get the same info from 'Interfaces' list ?
Where is the problem to get the same info from 'Interfaces' list ?
Re: ppp--->> active connectin, doen not show Tx Rx rate in V3.4
Did you not read the whole post? The problem is that the tx/rx rates have been removed from the active connections tab (and can't be added through the columns options).
We are used to being able to see the IP address and the rates on the same page and it's a pain in the ass to switch back and forth to get info we're used to having right in front of us.
We are used to being able to see the IP address and the rates on the same page and it's a pain in the ass to switch back and forth to get info we're used to having right in front of us.
Re: ppp--->> active connectin, does not show Tx Rx rate in V3
i have upgraded one of my router to v3.13. But still no change. i think Mikrotik Team should think about this "PPPOE Active connection"
-
-
omidkosari
Trainer
- Posts: 640
- Joined:
- Location: Canada, Toronto
Re: ppp--->> active connectin, does not show Tx Rx rate in V3
i agreeeeee . i have requested it before in another topic but seems no change . with new versions of mikrotik , such good features should not be deleted.
to mikrotik team : i don't think activating this user friendly feature to be hard for you . please give us tx/rx in ppp > connections . it was very useful . it is not a feature request . it is a missing feature.
to mikrotik team : i don't think activating this user friendly feature to be hard for you . please give us tx/rx in ppp > connections . it was very useful . it is not a feature request . it is a missing feature.
Re: ppp--->> active connectin, does not show Tx Rx rate in V3
why do you need it there? - just use interface menu and monitor it there.
-
-
omidkosari
Trainer
- Posts: 640
- Joined:
- Location: Canada, Toronto
Re: ppp--->> active connectin, does not show Tx Rx rate in V3
Did you not read the whole post? The problem is that the tx/rx rates have been removed from the active connections tab (and can't be added through the columns options).
We are used to being able to see the IP address and the rates on the same page and it's a pain in the ass to switch back and forth to get info we're used to having right in front of us.
Re: ppp--->> active connectin, does not show Tx Rx rate in V3
Hi
It seems, that my problem fits into this topic.
The "bytes" and "packets" properties of the users in "/ppp active" do not deliver any value, although with "print stats" the data can be printed to the screen:
I'm using Routeros 3.15.
Would be nice if this bug could be fixed.
Regards, Thomas
It seems, that my problem fits into this topic.
The "bytes" and "packets" properties of the users in "/ppp active" do not deliver any value, although with "print stats" the data can be printed to the screen:
Code: Select all
[admin@router] > /ppp active print
Flags: R - radius
# NAME SERVICE CALLER-ID ADDRESS UPTIME ENCODING
0 CLIENT pptp xxx.xxx.100.16 192.168.3.100 28m33s MPPE128 statefull
[admin@router] > :put [/ppp active get 0 bytes]
[admin@router] > :put [/ppp active get 0 packets]
[admin@router] > /ppp active print stats
Flags: R - radius
# NAME BYTES PACKETS
0 CLIENT 669/1576 22/24
[admin@router] >Would be nice if this bug could be fixed.
Regards, Thomas
Who is online
Users browsing this forum: Bing [Bot] and 122 guests