dear all

i want to load balance between 4 wans , but when any wan of the 4 wans fail, i want the
bandwidth step down to keep fair speed between the users. for example i give 1 Mb for every user , when 1 wan fail the speed for every user must be 768k automatically.

Note: this is for PPPoe .

thanks alot

You can probably accomplish this with scripts, but it would probably be quite complex.

ECMP http://www.mikrotik.com/testdocs/ros/2.9/ip/route.php
and
PCQ http://www.mikrotik.com/testdocs/ros/2.9/root/queue.php

will do the trick

ECMP http://www.mikrotik.com/testdocs/ros/2.9/ip/route.php
and
PCQ http://www.mikrotik.com/testdocs/ros/2.9/root/queue.php

will do the trick

Hi ;
I am so glad to write here .
I already read the route file from the site and decide to do ECMP , but there is important question about getting service from 2 ISP or more .
I have a question regarding the load balance and i wrote it before under the topic more than two DNS ip in begginers basics .
I need your comments on it .
with best regards .