Community discussions

MikroTik App
 
medube
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 86
Joined: Tue Feb 15, 2005 2:50 pm

Router OS 3.4 and PPPoE Problem

Sat Mar 15, 2008 11:16 am

Hi all,

I upgraded 2 of my boxes yesterday to Router OS 3.4 and seem to be having a problem with the PPPoE Server. After the upgrade everything worked fine, but I notice that after sometime, it kills the PPPoE connections and doesnt allow any new connection on. When I watch the logs to see if any client is trying to connect via PPPoE, all I see it the attempt to connect and it immediately disconnects without trying to authenticate. The only remedy I have found so far, is when it does this, I reboot the unit and all comes back ok for another 2 or 3 hours after which the problem starts again.

Has anyone seen this and have a solution?

Thanks.
 
medube
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 86
Joined: Tue Feb 15, 2005 2:50 pm

Re: Router OS 3.4 and PPPoE Problem

Sat Mar 15, 2008 11:17 am

Forgot to add, I'm using a RB333 and Senao wireless interfaces. This has been working perfectly for the last 3 months running Router OS 3 RC4.
 
User avatar
gmsmstr
Trainer
Trainer
Posts: 942
Joined: Fri Jun 04, 2004 2:22 am
Location: St. Louis, MO
Contact:

Re: Router OS 3.4 and PPPoE Problem

Sat Mar 15, 2008 4:14 pm

Downgrade to 3.3 or 3.2 and see if you still have the issue. Either way, if it occurs again then submit a supout to support@mikrotik.com while the issue is going on.
Dennis Burgess, MCTCE, MTCNA, MCTCTE, MTCWE, MTCNIE, A+, N+, MCP, MTCSE Mikrotik Certified Consultant / Trainer
Need Mikrotik Support: http://www.linktechs.net -- Link Technologies, Inc.
-- Author of "Learn RouterOS: Second Edition"
 
medube
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 86
Joined: Tue Feb 15, 2005 2:50 pm

Re: Router OS 3.4 and PPPoE Problem

Sat Mar 15, 2008 4:37 pm

My problem is I dont have a copy of either 3.2 or 3.3. Do you happen to know where I can get either of them?
 
medube
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 86
Joined: Tue Feb 15, 2005 2:50 pm

Re: Router OS 3.4 and PPPoE Problem

Sat Mar 15, 2008 4:48 pm

Sorry I noticed I installed the new version on my RB233 with PCMCIA card and CM9, so if you know where I can get any earlier 3.x version, I would appreciate it. I even noticed that the whole system gets a delay thats why the PPPoE stops working. Even if I open interfaces, it shows me nothing. I also notice pings to the unit get very high.
 
sojicmk
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Fri May 04, 2007 4:32 pm

Re: Router OS 3.4 and PPPoE Problem

Sat Mar 15, 2008 8:55 pm

I had the same problem with upgrade.
 
User avatar
Letni
Member
Member
Posts: 375
Joined: Tue Dec 05, 2006 5:16 am
Location: South Carolina

Re: Router OS 3.4 and PPPoE Problem

Sat Mar 15, 2008 9:37 pm

 
medube
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 86
Joined: Tue Feb 15, 2005 2:50 pm

Re: Router OS 3.4 and PPPoE Problem

Thu Mar 20, 2008 8:00 pm

@sojicmk, do you know if these problems were solved in the new 3.5 or 3.6?

Who is online

Users browsing this forum: Baidu [Spider], sindy and 152 guests