Page 1 of 1

value Port-limit from radius ignored

Posted: Tue Mar 18, 2008 1:56 pm
by antonioff
Hi all,
I have problem with server pppoe and radius.
User authentication via radius works properly with limitation of Banda.
The problem in reply is specified radius of the port-limit not to authenticate multiple users with the same username.
But is ignored, how can we do?

Re: value Port-limit from radius ignored

Posted: Fri Mar 21, 2008 12:14 pm
by karo84
Hi
Port-Limit will not work for PPP users.
You have to enable such option on RADIUS server, that will disallow duplicate
sessions.
FreeRADIUS server supports feature that is called 'Simultaneous-Use'. You need
to enable this.

Thanks
Regards Karapet Aznavuryan

Re: value Port-limit from radius ignored

Posted: Tue Mar 25, 2008 9:57 am
by savage
Yuppers. Port-Limit is a check item, not a reply item. i.e. it's checked on the radius server (from accounting data which needs to be kept current), and not on the router.

Re: value Port-limit from radius ignored

Posted: Thu May 15, 2008 1:00 am
by maxfava
same problem using windows server 2003 and IAS.

enabling log (go to system logging and create e memory log that filter radius/debug.
it receive port limit from radius but ROS does not apply it

ciao
Max