Community discussions

 
ntmanxp
just joined
Topic Author
Posts: 21
Joined: Fri Feb 15, 2008 9:04 pm

interface errors not in SNMP

Wed Apr 23, 2008 8:24 pm

Hi,
I am using Version 3.7 in a PC x86 with 2 NICs.
Speed is set to auto in both, and the switches are in auto too.
By browsing the interfaces with SNMP, I got 0 ( zero ) errors in Tx/Rx Error Packets Counters (IfInErrors/IfOutErrors).
But the switch itself is incresing error counters in the port where the NIC is attached. :(

Is this a bug of this version? :shock:

How can I get the counter of the NICs in the Mikrotik Router Itself ( besides SNMP! )??

Regards,
 
snoozer
Member Candidate
Member Candidate
Posts: 154
Joined: Mon Jun 18, 2007 5:13 pm
Location: Schull, West-Cork, Ireland.

Re: interface errors not in SNMP

Thu Apr 24, 2008 6:28 pm

hello,

i have noticed that since we have upgraded to 3.x i have no error stats anymore. it was all fine in 2.9.x. i assume that a bug or simply not priority to MT.

regards
Jan
 
User avatar
fatonk
Member
Member
Posts: 439
Joined: Tue Feb 22, 2005 11:06 am
Location: Mitrovica/Kosova

Re: interface errors not in SNMP

Thu Apr 24, 2008 7:02 pm

does the version 3.x requests any new MIB ?
 
awsmith
newbie
Posts: 45
Joined: Wed May 31, 2006 8:18 am

Re: interface errors not in SNMP

Sun Apr 27, 2008 7:15 am

Ethernet errors can be unidirectional (as in, device A sees no problem, but device B does). Check to see if the MT and the switch are actually negotiating and operating in full-duplex mode. A duplex mismatch could cause one-way errors (late collisions, etc). Even if this is not the problem, the errors still can really be one-way and there is nothing wrong with the MT reporting that it sees no errors. Also consider replacing the cable, swapping physical ports on the switch and the MT, etc.
 
marko_bg
Member Candidate
Member Candidate
Posts: 119
Joined: Sat Jun 03, 2006 11:48 am

Re: interface errors not in SNMP

Sun Apr 27, 2008 2:42 pm

does the version 3.x requests any new MIB ?
can anybody confirm this ?!

is the old MIB are same in 2.9 vs 3.x ?

Who is online

Users browsing this forum: No registered users and 64 guests