Page 1 of 1

RB/532 Lost ALL Routing Function After Reboot

Posted: Sat May 10, 2008 9:46 am
by giganet
I will also submit this to MT support...

Today I had a RB/532 go from able to see the world to no route to host after a simple 'reboot'!

Now after the reboot when in WinBox and I view > IP > Routes
all of my routing is GONE!

Likewise when I open Terminal in WinBox and issue the command 'ip route print'
I see the following results rather than my routes;
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf 
 #     DST-ADDRESS        PREF-SRC        G GATEWAY         DISTANCE INTERFACE
error - contact MikroTik support and send a supout file (2)
Has anyone experienced this and able to share how to overcome this condition?

Thanks

Regards

Re: RB/532 Lost ALL Routing Function After Reboot

Posted: Mon Jun 09, 2008 11:31 am
by Egate
Only one thing i can think of. Firewall connection tracking still on?

Re: RB/532 Lost ALL Routing Function After Reboot

Posted: Tue Jun 10, 2008 12:13 pm
by Tanker
That little thing under /files/backup is also quite handy....

as a rule - I never go near a RB without clicking on the backup first - ya just never know .....