Community discussions

 
rafa_lore
Member Candidate
Member Candidate
Topic Author
Posts: 121
Joined: Tue Apr 17, 2007 4:57 am
Location: Salta
Contact:

How can I see if my micro-sd is working in a RB433AH

Wed Aug 13, 2008 5:32 am

Hello
I'm changing all my Routerboard with RB433AH. And I bougth 2 Gb micro-sd Kingston. I was reading in this forum the compatibility with the micro-sd and in some place said that could works and in other not!! So, how can I see if it recognized?? :?
If I go to "ip --> proxy --> webproxy settings" in winbox I can see, but with terminal server no!! Another test that I did, is to insert the memory in my PC and save some file there, then insert it in the RB, and make it format. You can select it, but you can't see if its is formatting the memory. So then I insert again in my PC and say that the micro-sd doesn´t have format. What can I think about its? Works or Not? :?
And if I go to system resources is the same with or without the memory, not change nothing!! I have the same memory and the same HDD. Look here I paste the result of the RB433AH with micro-sd of 2 GB inserted:
 /system resource> pr
                   uptime: 2m25s
                  version: "3.11"
              free-memory: 117140kB
             total-memory: 127592kB
                      cpu: "MIPS 24K V7.4"
                cpu-count: 1
            cpu-frequency: 680MHz
                 cpu-load: 2
           free-hdd-space: 33912kB
          total-hdd-space: 61440kB
  write-sect-since-reboot: 157
         write-sect-total: 85373
               bad-blocks: 8
        architecture-name: "mipsbe"
               board-name: "RB433"
Also, I upgade the system with the comand:
 /system routerboard upgrade
Please help, to see if I have to change all the memorys!!! :( :(
Thanks
Rafael Lore
Last edited by rafa_lore on Wed Aug 13, 2008 4:44 pm, edited 1 time in total.
 
User avatar
hilton
Long time Member
Long time Member
Posts: 635
Joined: Thu Sep 07, 2006 5:12 pm
Location: Jozi (aka Johannesburg), South Africa

Re: How can I see if my micro-sd is working in a RB432AH

Wed Aug 13, 2008 4:06 pm

Assuming you meant RB433AH, then try this;

/ip proxy check-drive micro-sd
Regards
Hilton
 
rafa_lore
Member Candidate
Member Candidate
Topic Author
Posts: 121
Joined: Tue Apr 17, 2007 4:57 am
Location: Salta
Contact:

Re: How can I see if my micro-sd is working in a RB433AH

Wed Aug 13, 2008 4:43 pm

Yes sorry I'm using RB433AH
When I use this command said:
/ip proxy check-drive micro-sd
drive will be checked shortly
And nothing more!!
Thanks!!
Rafael Lore
 
efreire
just joined
Posts: 5
Joined: Tue Jan 01, 2008 9:24 pm

Re: How can I see if my micro-sd is working in a RB433AH

Thu Nov 06, 2008 10:47 pm

:D I do this:
store disk format-drive micro-sd
Then it works

When i put store disk print, I have now
 0 S system                              61440KiB      31848KiB      ready
 1   micro-sd                            976376KiB     976356KiB     ready
Regards

Eduardo

Who is online

Users browsing this forum: Google [Bot] and 43 guests