Community discussions

MikroTik App
 
NoWire
just joined
Topic Author
Posts: 1
Joined: Fri Apr 15, 2005 9:34 pm

OSPF -Init

Fri Apr 15, 2005 9:59 pm

I am running a average sized wireless network. (9 AP's & 28 Stations). I am running OSPF across the whole WAN. It has been running fine for about a month now all of a sudden, on random links the OPSF is coming up with
state=Init
and the traffic is not routed through. The only way it can be resolved is if i reboot the remote routerboard then it works again for a few days. I am running v2.8.26 on all the boards. Any help would be appreciated.
 
luminary
just joined
Posts: 2
Joined: Tue Feb 22, 2005 3:48 pm

Fri Apr 22, 2005 6:04 am

We are seing the same issue but it happens in about 10 minutes for us. The OSPF links to Full then about 10 minutes later it drops to INIT.

Does anyone have an answer for this?
 
wirdo
Frequent Visitor
Frequent Visitor
Posts: 72
Joined: Fri Jun 18, 2004 8:50 pm

Fri Apr 22, 2005 9:28 am

happened to me too - seems 2.8.26 is buggy.
I have about 20 ospf MT connected routers in my network and can confirm that with 2.8.26. Previous versions run OK.
BTW do telnet 0.0.0.0 in command promt and benefit from all quagga can offer :) Ports are 2604 - ospf, 2605 - bgpd.

Cheers!
 
luminary
just joined
Posts: 2
Joined: Tue Feb 22, 2005 3:48 pm

Fri Apr 22, 2005 3:16 pm

Thanks for the information on how to get into quagga. Never thought to try that and it gives us information that is much needed.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Fri Apr 22, 2005 3:19 pm

please - everyone that has encountered this problem, please make a supout.rif file at the moment the OSPF is not working, and - with a description of the problem and your network setup, please send it to support
No answer to your question? How to write posts
 
Lewis
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri May 28, 2004 8:58 pm
Location: Thessaloniki, GREECE
Contact:

Sat Apr 23, 2005 11:19 pm

please - everyone that has encountered this problem, please make a supout.rif file at the moment the OSPF is not working, and - with a description of the problem and your network setup, please send it to support
i just mailed a supout.rif file..

i hope this can help..
lewis <at> TWMN.net

Thessaloniki's Wireless Metropolitan Network
http://TWMN.net
 
Lewis
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri May 28, 2004 8:58 pm
Location: Thessaloniki, GREECE
Contact:

Mon Apr 25, 2005 2:33 pm

any news ?

i noticed that this happens between 2.8.26 routers.
I have a 2.8.26 box connected with 5 other MT boxes, running different versions, and ospf hungs only on one interface, this one is connected to a 2.8.26 also..
lewis <at> TWMN.net

Thessaloniki's Wireless Metropolitan Network
http://TWMN.net
 
daztilt
just joined
Posts: 9
Joined: Wed Jan 26, 2005 8:45 pm

Mon Apr 25, 2005 2:39 pm

I am having the same issue with a .26 version running ospf with a cisco router. Had no problems with older version, now it only goes to init on the cisco side and init on routeros side.

Help...
 
daztilt
just joined
Posts: 9
Joined: Wed Jan 26, 2005 8:45 pm

Mon Apr 25, 2005 2:46 pm

Update, it looks like the routeros is not seeing its own router id in the hellos being send back from the other router.
So its not getting past the init state.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Mon Apr 25, 2005 2:54 pm

keep sending them supout's
No answer to your question? How to write posts
 
Lewis
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri May 28, 2004 8:58 pm
Location: Thessaloniki, GREECE
Contact:

Tue Apr 26, 2005 5:15 am

anyone has 8.2.25 all-packages ?

i have to switch back.. our network is a mess with this bug...
lewis <at> TWMN.net

Thessaloniki's Wireless Metropolitan Network
http://TWMN.net
 
Lewis
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri May 28, 2004 8:58 pm
Location: Thessaloniki, GREECE
Contact:

Tue Apr 26, 2005 1:29 pm

anyone has 8.2.25 all-packages ?

i have to switch back.. our network is a mess with this bug...
http://usa2.mikrotik.com/download/all_p ... 2.8.25.zip
lewis <at> TWMN.net

Thessaloniki's Wireless Metropolitan Network
http://TWMN.net
 
Lewis
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri May 28, 2004 8:58 pm
Location: Thessaloniki, GREECE
Contact:

Tue Apr 26, 2005 4:21 pm

2.8.25 on one side, 2.8.26 on the other,
same sh#t...

i'll try to downgrade the second one...
lewis <at> TWMN.net

Thessaloniki's Wireless Metropolitan Network
http://TWMN.net
 
Lewis
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri May 28, 2004 8:58 pm
Location: Thessaloniki, GREECE
Contact:

Tue Apr 26, 2005 11:24 pm

2.8.25 on one side, 2.8.25 on the other,
same sh#t...

do i have to downgrade to 2.7.xx ?
:cry:
lewis <at> TWMN.net

Thessaloniki's Wireless Metropolitan Network
http://TWMN.net
 
mip
Member Candidate
Member Candidate
Posts: 122
Joined: Fri Jun 04, 2004 8:19 pm
Location: Ráckeve
Contact:

Wed Apr 27, 2005 12:43 am

We have this problem, but not so often ( once in a month or two months). You can write a sript tat checks route table ,and if ts too short, do a reboot. Ops, we use 2.8.19, and as I see we won't upgrade till 2.9.
https://www.youtube.com/watch?v=j7q0Y_JZMrg - the country you must visit
 
Lewis
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri May 28, 2004 8:58 pm
Location: Thessaloniki, GREECE
Contact:

Wed Apr 27, 2005 1:12 am

I'm talking about a community wireless network with more than 40 MT routers, everyone has 2-5 wireless interfaces (running ospf)..
and 250+ users...

Since this is a closed network, without internet access, every file transfer occurs between users..
Our main routers has 12-15Mbps traffic in EACH interface...

thats why i feel anxious about this bug...
lewis <at> TWMN.net

Thessaloniki's Wireless Metropolitan Network
http://TWMN.net
 
Lewis
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri May 28, 2004 8:58 pm
Location: Thessaloniki, GREECE
Contact:

Thu Apr 28, 2005 3:23 am

a new version is out, 2.8.27 but this is the only comment in change log is:
What's new in 2.8.27:

*) added optional wireless package for RouterBOARD R52 (Atheros 5414/13) support;
what about ospf ?
lewis <at> TWMN.net

Thessaloniki's Wireless Metropolitan Network
http://TWMN.net
 
eflanery
Member
Member
Posts: 382
Joined: Fri May 28, 2004 10:11 pm
Location: Moscow, ID
Contact:

Fri Apr 29, 2005 8:15 pm

BTW do telnet 0.0.0.0 in command promt and benefit from all quagga can offer :) Ports are 2604 - ospf, 2605 - bgpd.
Very interesting, but...

What is the password?

Quagga does not appear to have a default, nothing obvious worked, and the system admin password did not work.

Mostly, I'm just interested in looking around, not changing anything. But, the enable password would be cool too.

Thanks,
--Eric
Eric Flanery
Wireless Manager
FirstStep Internet
(208)882-8869
 
sten
Forum Veteran
Forum Veteran
Posts: 920
Joined: Tue Jun 01, 2004 12:10 pm

Fri Apr 29, 2005 9:07 pm

Well, quagga is based on zebra :)

Anyhow, misconfigure and the thing blows up!
 
eflanery
Member
Member
Posts: 382
Joined: Fri May 28, 2004 10:11 pm
Location: Moscow, ID
Contact:

Fri Apr 29, 2005 9:23 pm

Well, quagga is based on zebra :)

Anyhow, misconfigure and the thing blows up!
Gotcha, Thanks!

Something to be _very_ carefull with, but quite interesting to look at.
Eric Flanery
Wireless Manager
FirstStep Internet
(208)882-8869
 
SquireO
just joined
Posts: 5
Joined: Tue Jun 08, 2004 9:05 am
Location: Piedmont - North Carolina
Contact:

MT OSPF & Cisco OSPF after all?

Sat Apr 30, 2005 5:47 am

I am having the same issue with a .26 version running ospf with a cisco router. Had no problems with older version, now it only goes to init on the cisco side and init on routeros side.

Help...
Anyone care to share notes on getting MT OSPF & Cisco's to play together? I admit to not knowing OSPF real well but...
I'm just stumbling along - forgive the mistakes made and that I will make! -- Me!!!

Who is online

Users browsing this forum: danmiles86, Majestic-12 [Bot] and 164 guests