Page 1 of 1

Traffic shapping using Winbox

Posted: Thu Jan 15, 2009 12:02 am
by ve2wat
Hi huys, would need help in establishing traffic shapping on an AP using Winbox.
Have tried some examples here but cant get them to work.
Looking for a basic step by step "how to" to create a download/upload limit for 5 wds clients, some at 1M and some at 2M.

Thanks

Re: Traffic shapping using Winbox

Posted: Thu Jan 15, 2009 4:18 pm
by sergejs
/queue simple add target-address=IP_address_of_the_client max-limit=2m/2m
More information,
http://wiki.mikrotik.com/wiki/Category: ... ic_control
http://www.mikrotik.com/testdocs/ros/3.0/qos/queue.php

Re: Traffic shapping using Winbox

Posted: Fri Jan 16, 2009 8:39 pm
by ve2wat
Thanks for the info.
I tried the code line and it did not work, must be missing something else.

I'm reading on the links provided and will try that.

Rick

Re: Traffic shapping using Winbox

Posted: Fri Jan 16, 2009 8:54 pm
by zhall
Thanks for the info.
I tried the code line and it did not work, must be missing something else.

I'm reading on the links provided and will try that.

Rick
type print packets or print all stats

if the number is incrementing then its working. and what sergejs typed is right for limiting a client. it does work.


edit: i don't use winbox, this is console instructions.