Community discussions

MikroTik App
 
rpengineering
newbie
Topic Author
Posts: 38
Joined: Thu Mar 20, 2008 9:12 pm
Location: italy

Bridged Network to Routed Network migration

Fri Mar 13, 2009 3:47 pm

Dear,
I need to migrate from a bridged wireless network to a routed wireless network have you any guidelines to make the network reconfiguration?
Regards
 
User avatar
Egate
Long time Member
Long time Member
Posts: 552
Joined: Thu May 15, 2008 10:43 am
Location: South Africa

Re: Bridged Network to Routed Network migration

Sun Mar 15, 2009 10:37 am

The best way is to change the ip's on router boards and access points, in order for routing to be able to work. Then activate routing rip on all your routers. This will sort your router paths automatically. To see if it is running go to ip routes. Should be many routes, getting more as you change router boards. As soon as this is done. Disable bridge. If done correctly, every thing should keep on running. Very easy. 8) Biggest thing is the ip's make a nice exel spread sheet.
Happy days. :-)
 
rpengineering
newbie
Topic Author
Posts: 38
Joined: Thu Mar 20, 2008 9:12 pm
Location: italy

Re: Bridged Network to Routed Network migration

Mon Mar 16, 2009 6:19 pm

i aldeady know it.
I need configuration guidelines - examples.

Access point (wlan1 wlan2 ethernet) routes and firewall configurations
edge router configuration

ecc.
 
andreacoppini
Trainer
Trainer
Posts: 489
Joined: Wed Apr 13, 2005 11:51 pm
Location: Malta, Europe

Re: Bridged Network to Routed Network migration

Mon Mar 16, 2009 6:39 pm

i aldeady know it.
I need configuration guidelines - examples.

Access point (wlan1 wlan2 ethernet) routes and firewall configurations
edge router configuration

ecc.
For an overview on how you should approach it, go through Tiktube.com as I recall there was a presentation about this during one of the Poland MUMs, not sure which one though!

If you need specifics, please hire one of us here :D
- No strings attached -

<< Please give good Karma if this post helped you. Press the + button above the Location entry
 
rpengineering
newbie
Topic Author
Posts: 38
Joined: Thu Mar 20, 2008 9:12 pm
Location: italy

Re: Bridged Network to Routed Network migration

Tue Mar 17, 2009 5:39 pm

Dear,
I' ve not founded the mum presentation,
Can you give me an hand to make this migration ?

Regards
 
andreacoppini
Trainer
Trainer
Posts: 489
Joined: Wed Apr 13, 2005 11:51 pm
Location: Malta, Europe

Re: Bridged Network to Routed Network migration

Tue Mar 17, 2009 7:25 pm

Hi,

sure can help you with it.. send me a private message with your e-mail or Skype address
- No strings attached -

<< Please give good Karma if this post helped you. Press the + button above the Location entry
 
rpengineering
newbie
Topic Author
Posts: 38
Joined: Thu Mar 20, 2008 9:12 pm
Location: italy

Re: Bridged Network to Routed Network migration

Wed Mar 18, 2009 3:09 pm

i'm sorry but i'm not able to send private message in this forum, i do not have private messages link
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8383
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Bridged Network to Routed Network migration

Wed Mar 18, 2009 11:41 pm

i'm sorry but i'm not able to send private message in this forum, i do not have private messages link
[offtop]
omg! they switched them off again =(

Normis, please, enable PMs =)
[/offtop]
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
rpengineering
newbie
Topic Author
Posts: 38
Joined: Thu Mar 20, 2008 9:12 pm
Location: italy

Re: Bridged Network to Routed Network migration

Tue Jun 14, 2011 12:16 pm

Dear,
i've done the migration successfull..
using ospf and mpls for centralized pppoe.

it works very very well
 
goofy
just joined
Posts: 5
Joined: Wed Aug 13, 2008 2:01 am

Re: Bridged Network to Routed Network migration

Tue Jul 19, 2011 10:13 am

did you use VPLS?
 
rpengineering
newbie
Topic Author
Posts: 38
Joined: Thu Mar 20, 2008 9:12 pm
Location: italy

Re: Bridged Network to Routed Network migration

Fri Jul 22, 2011 6:23 pm

yes, i use ospf, mpls , vpls
 
goofy
just joined
Posts: 5
Joined: Wed Aug 13, 2008 2:01 am

Re: Bridged Network to Routed Network migration

Fri Jul 22, 2011 11:24 pm

rpengineering,
What's your mtu?
I used some uplinks ubnt.
ubnt's support MTU 1518

it is not work on our network with ubnts, I think


Thanks
 
virgin
just joined
Posts: 14
Joined: Fri Jul 08, 2011 11:30 am

Re: Bridged Network to Routed Network migration

Sat Jul 23, 2011 9:52 am

yes, i use ospf, mpls , vpls
Cain i have ur email id....i also want to migrate bridge network to router network. Can u help me with that.

Thanks
 
rpengineering
newbie
Topic Author
Posts: 38
Joined: Thu Mar 20, 2008 9:12 pm
Location: italy

Re: Bridged Network to Routed Network migration

Tue Jul 26, 2011 1:10 pm

<goofy>
i use for internal routing mtik and for bbones ALCOMA or mtik and MPLS/VPLS works fine!!
 
rpengineering
newbie
Topic Author
Posts: 38
Joined: Thu Mar 20, 2008 9:12 pm
Location: italy

Re: Bridged Network to Routed Network migration

Tue Jul 26, 2011 1:11 pm

yes, i use ospf, mpls , vpls
Cain i have ur email id....i also want to migrate bridge network to router network. Can u help me with that.

Thanks
Dear,
i can help you but
i've mp disabled please use my skype id alexrpeng

Regards
 
rpengineering
newbie
Topic Author
Posts: 38
Joined: Thu Mar 20, 2008 9:12 pm
Location: italy

Re: Bridged Network to Routed Network migration

Tue Jul 26, 2011 1:12 pm

rpengineering,
What's your mtu?
I used some uplinks ubnt.
ubnt's support MTU 1518

it is not work on our network with ubnts, I think


Thanks
My mtu is 1504

Who is online

Users browsing this forum: Google [Bot] and 100 guests