3.22 released

enk · Mon Mar 16, 2009 3:47 pm

RouterOS 3.22 has been released today.

What's new in 3.22:

*) added advanced switch features for RB450G;
*) added support for MetaROUTER on RB450G;
*) added support for adding physical interfaces to Metarouters;
*) added set-bgp-prepend-path action to routing filters;
*) added WinBox OSPFv3 support to routing-test package;
*) added WinBox IPv6 routes support to routing-test package;
*) console - added 'hide-sensitive' option to the export command;
*) user manager - fixed customer remove interface bug;
*) fixed Cisco BGP VPLS autodiscovery in mpls-test package;
*) fixed LDP to not disconnect on unknown capabilities of remote
peer (should help establish LDP session with Junos);
*) fixed ethernet port name reordering on RB493;
*) bonding mode balance-alb now works on RB1xx, RB4xx, RB616, RB600, RB750,
RB1000;
*) added '/interface ethernet print stats' command for RB450G and RB750;
*) fixed CSPF in routing-test to properly interpret link bandwidth;
*) added support for C-motech CNU-680 CDMA 1x EV-DO 450Mhz USB Modem;

What's new in 3.21:

*) backported MetaROUTER support for RB4xx from v4;
*) added WinBox MPLS & VPLS support mpls-test package;
*) added WinBox BGP support to routing-test package;
*) api - added query support for 'print' command;
*) added support for bsd-syslog;
*) added TFTP server;
*) added authorization and TLS support to email tool;
*) added pppoe-scanner;
*) added tftp protocol support to fetch tool;
*) fixed ipsec policy priority to work as documented;
*) fixed BGP route selection in routing package;
*) allow to use IPsec aggressive mode with pre-shared keys;
*) fixed some problems in mesh protocol;
*) fixed https proxying with parent proxy;
*) fixed Prism shared IRQ issue;
*) fixed multiple MPLS/VPLS bugs in mpls-test;
*) fixed boot problems on some RB1000s;
*) added /interface mesh traceroute command;
*) fixed web proxy source address selection;
*) fixed pcq queue - pcq sometimes could get through more traffic
than specified in max-limit;

Mon Mar 16, 2009 4:00 pm

finally some changes, huh

mietus · Mon Mar 16, 2009 4:08 pm

i think i've oversleeped 3.21 and one time 3.22 this is the second ;p

Mon Mar 16, 2009 4:14 pm

both 3.21 and 3.22 are released together, you didn't oversleep. mikrotik skipped a version this time

omega-00 · Mon Mar 16, 2009 4:19 pm

Edit: I'm misreading and failing \/-- see below.

Mon Mar 16, 2009 4:22 pm

Yeah what was with that? I never saw the email for 3.21 either

both 3.21 and 3.22 are released together, you didn't oversleep. mikrotik skipped a version this time

Ozelo · Mon Mar 16, 2009 4:26 pm

*) api - added query support for 'print' command;
*) added TFTP server;
*) added authorization and TLS support to email tool;

Amazing!, Thanks a lot!

*) added pppoe-scanner;

What it do? Intriguing...

*) fixed pcq queue - pcq sometimes could get through more traffic
than specified in max-limit;

Now thats a surprise!

Thank you.

Ozelo

dingsingo · Mon Mar 16, 2009 4:36 pm

Hi,

in 3.21 is *) added WinBox MPLS & VPLS support mpls-test package.

But i didn't see in Winbox with Version 3.22. It's again out in 3.22 ?

dingsingo

proggams2 · Mon Mar 16, 2009 5:29 pm

pppoe-scanner? what does it do and where could we find it ?

ayufan · Mon Mar 16, 2009 5:58 pm

/ interface pppoe-scanner

it searches for active pppoe-servers
i personally think better would be something like dhcp alert :) maybe pppoe alert? :D

sioannou · Mon Mar 16, 2009 6:27 pm

When you add the packages for 3.22 to Dude so you can do a remote upgrade the version 3.22 doesn't uppear under the Upgrade submenu. Any ideas ?????

honzam · Mon Mar 16, 2009 6:56 pm

Where is changelog for new BIOS 2.20? http://www.routerboard.com/files/rb-2.20/CHANGELOG

Krle · Mon Mar 16, 2009 6:59 pm

*) fixed ethernet port name reordering on RB493;

what exactly does it do? will it mess up my configuration if i upgrade (e.g. what happens with the reordering)?

dprus · Mon Mar 16, 2009 7:06 pm

I was just wondering if those changes to the 450G mean that ports 2-5 can be used like a hardware switch now? I purchased one of these last week and was disappointed to find that this functionality was not supported even though it is supported in the 450 (non-G).

proggams2 · Mon Mar 16, 2009 10:19 pm

the new usermanager mikrotik was talking about with new features because it was said it will be included, is it included in this 3.22 ??

artizzz · Tue Mar 17, 2009 1:33 am

dprus: can't you use any MT router as a switch ? simply make a bridge between the port witch you want to use as switch and done.

Got problems installing ROS-3.22 from an .iso - when it goes to creating partitions and formating them - kernel panics. Tryed it on various hardware (x86 like hw). Tryed out ROS-3.20 .iso - this one worked without problems.

omega-00 · Tue Mar 17, 2009 1:46 am

When you add the packages for 3.22 to Dude so you can do a remote upgrade the version 3.22 doesn't uppear under the Upgrade submenu. Any ideas ?????

I can second this - see the thread I created about it - http://forum.mikrotik.com/viewtopic.php?f=8&t=30362

ayufan · Tue Mar 17, 2009 2:27 am

.npk files look a little different, most probably because of small changes to package format, that's why you can't access them through dude :)

Tue Mar 17, 2009 8:55 am

the new usermanager mikrotik was talking about with new features because it was said it will be included, is it included in this 3.22 ??

no

what exactly does it do? will it mess up my configuration if i upgrade (e.g. what happens with the reordering)?

the opposite! it will fix the messup, if there is any

But i didn't see in Winbox with Version 3.22. It's again out in 3.22 ?

I don't understand your post. Upgrade and see.

Chupaka · Tue Mar 17, 2009 2:36 pm

NetInstall over Demo and No License on VMware works, but fresh install freezes on 'Harddrive found', 100% CPU load, flashing with Caps Lock and Scroll Lock...

cmartin · Tue Mar 17, 2009 3:37 pm

*) bonding mode balance-alb now works on RB1xx, RB4xx, RB616, RB600, RB750,

What the RB616 is? I would like to see at least short description ...

Tue Mar 17, 2009 3:46 pm

*) bonding mode balance-alb now works on RB1xx, RB4xx, RB616, RB600, RB750,
What the RB616 is? I would like to see at least short description ...

Early announcements are problematic. Noone buys the existing stuff cause you dont want to buy old things
and noone buys the new stuff cause it's not yet available. So what do you expect from MT?

Stefan

honzam · Tue Mar 17, 2009 4:19 pm

Where is changelog for new BIOS 2.20? http://www.routerboard.com/files/rb-2.20/CHANGELOG
What is the change in mipsbe?

Tue Mar 17, 2009 4:22 pm

What's new in 2.20:

*) added support for RB450G;

magic · Tue Mar 17, 2009 4:33 pm

But i didn't see in Winbox with Version 3.22. It's again out in 3.22 ?

I don't understand your post. Upgrade and see.[/quote]

I think he didn't find the mpls menu in winbox. I didn't find it either.

honzam · Tue Mar 17, 2009 4:41 pm

What's new in 2.20:

*) added support for RB450G;

Thanks

csickles · Wed Mar 18, 2009 5:27 pm

Anyone gotten the SMTP auth to work against an Exchange 2003 server ??

Keep getting "AUTH method not supported"...

Also... the password is NOT hidden in winbox. (when the hide passwords box IS chacked)..

changeip · Wed Mar 18, 2009 6:32 pm

are you allowing BASIC auth with exchange, or just digest ?

chapex · Wed Mar 18, 2009 6:47 pm

someone eperimented error in web-proxy with sd store : "nfs file handle ...."? (on this version)

regards

csickles · Thu Mar 19, 2009 3:19 am

Will look at it in the AM...

THX..

roc-noc.com · Thu Mar 19, 2009 6:20 am

I was just wondering if those changes to the 450G mean that ports 2-5 can be used like a hardware switch now? I purchased one of these last week and was disappointed to find that this functionality was not supported even though it is supported in the 450 (non-G).

Yes, I tested this with a RB450G and it is fixed. Any of the ports 1-5 can be assigned to a master port. The master port can be any port 2-5. Port 1 cannot be a master.

Tom

roc-noc.com · Thu Mar 19, 2009 6:24 am

RouterOS 3.22 has been released today.
What's new in 3.22:
--cut--
*) added '/interface ethernet print stats' command for RB450G and RB750;
--cut--

This is a feature that I have been asking for. Will be really nice when it works. Right now it just prints out a list of register names and all values are 0 and stay at 0.

Tom

msundman · Thu Mar 19, 2009 10:42 am

RouterOS 3.22 has been released today.
*) added '/interface ethernet print stats' command for RB450G and RB750;

Great! Could we hope to see this on RB1000 as well any time soon?

frogale · Thu Mar 19, 2009 12:44 pm

There is OSPFv3 bug in v3.22.. When simple or tree queue added, OSPFv3 shutdowns..

Log snapshot when disabling simple queue rule:

simple queue changed by dude
OSPFv3 neighbor 10.38.0.1: state change from Full to Down
OSPFv3 neighbor 10.38.0.2: state change from Full to Down
OSPFv3 neighbor 10.38.0.3: state change from Full to Down

Ozelo · Thu Mar 19, 2009 8:09 pm

Guess this is just some missing undefined variables...

Aug · Thu Mar 19, 2009 10:48 pm

sioannou wrote:
When you add the packages for 3.22 to Dude so you can do a remote upgrade the version 3.22 doesn't uppear under the Upgrade submenu. Any ideas ?????

I can second this - see the thread I created about it - http://forum.mikrotik.com/viewtopic.php?f=8&t=30362

It's not just in Dude.
In winbox you get the same results.
Auto-upgrade does not recognize the 3.22 packages. Tested with routeros-mipsbe-3.22.npk and routeros-x86-3.22.npk.
If I put the 3.22 file on the server and refresh auto-upgrade it comes back blank.
If I put the 3.20 file on the server and refresh auto-upgrade it comes back as installed.

andreacoppini · Fri Mar 20, 2009 12:56 am

I thought I was just imagining, but now that you're mentioning it....

I wanted to do a Netinstall with 3.22 earlier today. The 3.22 packages didn't show up in the list to choose the packages, while all other versions 3.20, 3.19, appeared.

gotix · Fri Mar 20, 2009 3:59 am

With version 3.20 i have a strange problem.....
RB433AH with 3 wireless interfaces R52H. I use to provide service at 2.4
I configured routerboard and it works, clients authenticate them self's over PPPoE.
But now all the clients that connect using wpa are unstable.
ON RB433AH with 3.20 they connect, disconnect... Any idea or experience???
I upgrade RB with OS3.22 and I hope that this problem will disappear. Any suggestion will be helpful.

Thank You

magic · Fri Mar 20, 2009 9:47 am

It's not just in Dude.
In winbox you get the same results.
Auto-upgrade does not recognize the 3.22 packages. Tested with routeros-mipsbe-3.22.npk and routeros-x86-3.22.npk.
If I put the 3.22 file on the server and refresh auto-upgrade it comes back blank.
If I put the 3.20 file on the server and refresh auto-upgrade it comes back as installed.

I found the same with the auto-upgrade. The upgrade works fine when I uploaded the packages with ftp to the routers. But no 3.22 packages in the auto-upgrade list.

Fri Mar 20, 2009 9:51 am

You have to download the new Netinstall to use new packages.

The Dude will also be updated.

"/system upgrade" will be fixed in next release.

andreacoppini · Fri Mar 20, 2009 10:26 am

You have to download the new Netinstall to use new packages.

True, that fixed it... Tks

sioannou · Fri Mar 20, 2009 12:45 pm

Also to mention that the MD5 issues with BGP on 3.22 looks like they have been fixed.
Any idea when the new dude is coming out????

h4ckxy · Tue Mar 24, 2009 4:43 am

how i can use Multi Link PPP in v. 3.22
i got 3 pppoe client want to make them into 1 pppoe so i can benefit from the traffic and enlarge
thanks

Tue Mar 24, 2009 8:45 am

In pppoe client's configuration specify all three interfaces. But it will not work if your provider doesn't have this feature.

Who is online