Community discussions

MikroTik App
 
dawam
Trainer
Trainer
Topic Author
Posts: 136
Joined: Wed May 31, 2006 1:40 pm
Location: Malaysia

RouterOS V3.28 release

Fri Aug 07, 2009 5:57 pm

What's new in 3.28:
*) fixed hotspot problem - on multi-processor systems it was not possible
to set IP address for hotspot client during login - deadlock did happen;
*) fixed hotspot problem - it was possible for hotspot to spike CPU usage
to 100% and not to accept new logins during that time;
*) added ethernet broadcast support for WakeOnLan tool;
*) api - value of 'comment' property was only returned from 'system' package
programs;
*) to see actual values of sensitive configuration parameters (such as
passwords), user needs to possess policy 'sensitive';
*) avoid problems with western time zones by always advancing clock on
startup past january 2st 1970, 00:00:00 UTC;
*) added 'run-after-reset' argument to 'reset-configuration' command. It
allows to specify name of console script file to run after the
configuration reset reboots the router. When this argument is used any
other default configuration scripts are ignored.
*) route - fixed a crash;
*) routing-test - fixed OSPF routing table calculation;
*) send keepalives every 30s (was 3 min) on ppp clients - make some 3G connections
more stable;
*) routing-test - changed BGP network and default-originate behaviour;
*) web proxy - allow to edit error page;
*) console - terminal window size change now does not trigger full terminal
reset;
*) mesh protocol - improved loop prevention (becomes incompatible with earlier versions);
----------------------------------------------------------------
Everything looks complicated to begin with, but it's surprisingly simple when you understand it.
 
perit
just joined
Posts: 5
Joined: Sun Mar 08, 2009 10:28 am

Re: RouterOS V3.28 release

Fri Aug 07, 2009 7:28 pm

*) routing-test - changed BGP network and default-originate behaviour;

What changed exactly ?
Thanks
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8393
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: RouterOS V3.28 release

Fri Aug 07, 2009 10:10 pm

*) routing-test - changed BGP network and default-originate behaviour;

What changed exactly ?
joining the question. it would be nice if MT could write more detailed changelog, at least for published changes =)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
duvi
Frequent Visitor
Frequent Visitor
Posts: 70
Joined: Fri Jun 05, 2009 12:32 pm
Contact:

Re: RouterOS V3.28 release

Sat Aug 08, 2009 1:54 am

Was anything changed regarding power handling on x86?
The previous versions were unable to power off the system, but in v3.28 System/Shutdown finally does turn off the computer (:
 
User avatar
NetworkPro
Forum Guru
Forum Guru
Posts: 1370
Joined: Mon Jan 05, 2009 6:23 pm
Location: Worldwide
Contact:

Re: RouterOS V3.28 release

Wed Aug 19, 2009 4:10 am

What's new in 3.28:
...
*) route - fixed a crash;
...
I think this messed ECMP with PPPoE interfaces. Automatic fail-over is not working - now when a single participant in an ECMP route is gone - the whole ECMP route is declared Network Unreachable. This invalidates a lot of setups.
wiki.mikrotik.com/wiki/NetworkPro_on_Quality_of_Service
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8393
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: RouterOS V3.28 release

Thu Aug 20, 2009 3:39 am

*) routing-test - changed BGP network and default-originate behaviour;

What changed exactly ?
joining the question. it would be nice if MT could write more detailed changelog, at least for published changes =)
still please comment, what changed in BGP...
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
nemka
newbie
Posts: 32
Joined: Wed Sep 27, 2006 4:30 pm

Re: RouterOS V3.28 release

Tue Sep 01, 2009 2:20 pm

Dude v2.2 can get bit rate data from ROS v3.28 with snmp only.
Bit rate graph "freezed" when mastering type is routeros.

Is it a bug or a feature? ;)


I found the answer here: http://forum.mikrotik.com/viewtopic.php?f=8&t=32175
 
jf77
just joined
Posts: 12
Joined: Thu May 21, 2009 10:32 am

Re: RouterOS V3.28 release

Fri Sep 11, 2009 1:03 pm

Well, well, well. New shiny version and the broute is still missing... Many "improvements" and many new bugs...
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6045
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: RouterOS V3.28 release

Fri Sep 11, 2009 1:05 pm

broute was removed few versions ago and will not be added back because it never worked correctly.
 
jf77
just joined
Posts: 12
Joined: Thu May 21, 2009 10:32 am

Re: RouterOS V3.28 release

Fri Sep 11, 2009 1:13 pm

broute was removed few versions ago and will not be added back because it never worked correctly.
It's your standard ansver, but it's no true... As I see it, you removed one functionality and you didn't offer any (functional) replace. It's cheating with customers.

Who is online

Users browsing this forum: Bing [Bot], eworm, Rahl, vecernik87, w0lt and 80 guests