MikroTik

RouterOS v4 FULL has been released!

The special edition RouterOS v4 newsletter PDF is available here:
http://www.mikrotik.com/pdf/newsletter21.pdf

RouterOS v4 FULL can be downloaded here:
http://www.mikrotik.com/download.html

RouterOS 4.0 have new bios 2.23. Where is changelog?
http://www.routerboard.com/files/rb-2.23/CHANGELOG

When a user is created with a time limit in user manager. The time continues to count down even if the user is logged off.

RouterOS 4.0 have new bios 2.23. Where is changelog?
http://www.routerboard.com/files/rb-2.23/CHANGELOG

Where is 2.23???? And is it for the legacy boards??
Thank you,
Rod

RouterOS 4.0 have new bios 2.23. Where is changelog?
http://www.routerboard.com/files/rb-2.23/CHANGELOG

not for all devices, only for some! it's to add support for these new devices (like RB750)

Why not write changelog? Last version with changelog is 2.19
Thanks

As I said, there is nothing surprising in there:

When will the online manual for v4 be on MT's website?

this is the manual now:
http://wiki.mikrotik.com/wiki/Category:Manual

it's not tied to any version, if there are version specific features, it will be noted in the text. it's never completed, it's updated all the time.

Hey Normis - on v4 I cannot do a freq scan on x86 - It times out. Its a PC based system.
Thank you,
Rod

it's time to change first forum's decription! should be

BETA Testing and Feature Suggestions for the next RouterOS release (ROS v5)

What's new in 4.1:

*) dhcp server - added support for dynamic address-list entries;

is it still with help of Mikrotik-Address-List (vendor=Mikrotik, id=19) from RADIUS response?

sharing... x86 info my v3.30 system license print,:
software-id: "0NOC-DFJD" <<< this is 8 digit SID
old-software-id: "YHSM-UMG"
upgradable-to: v4.x
nlevel: 6
features:

after upgrade to v4.0, system license print,:
software-id: "0NOC-DFJD"
old-software-id: "YHSM-UMG"
expires-in: 2d23h47m43s <<< become trial mode within 72h

I am understand that we need to update its license key, but why bother??
I hope that you reducing user to do this such steps just convert its lic key like you convert 7 to 8 digit SID

Thank you for listening

The dude no longer shows bandwidth on links as of 4.0.

My systems still running v3 work show everything fine.

software-id: "0NOC-DFJD" <<< this is 8 digit SID
old-software-id: "YHSM-UMG"

if you see 'old-software-id' - then you have license key for 7-digit softid. you had to upgrade license in v3.30 or in v4

Hi,

I have a problem with 4.x ( both ) . When i upgrade a x86 system using a XR5 from 3.30 to 4.x, the upgrade work fine and a few seconds after wireless conects the system samply HANGS.... , i samply downgrade the system again to 3.30 and the system back to work normally.... any ideas????????

BR

I do understand that need of update the lic key for the 8 digit SID but If we are at remote area how could it be apply where no i-net connectivity? these MT guy need to look a whole prospective how to applying new key etc

again thank you looking forward for its fixes

PS: thank you to bro Chupaka, how's things moving around?... headache??

for License uprgade, you need Internet access on the machine where WinBox is running

This release does not work properly !
On Rb133 after upgrade i have many packet lost from ethernet - to wireless.
When i try ping on the radio (from this device to another one) it looks good. From host on ehternet ping is ok too.
When i ping from host to device behind RB133 (ROS 4.1) I have many packet lost.
Downgrade to 3.30 correct problem.



[host] ---ethernet----> rb133(ros 4.1) ---wireless link -----> another RB


Best Regards

Chupaka, yes address-list attribute should be the same for DHCP over RADIUS.