Community discussions

MikroTik App
 
duvi
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 70
Joined: Fri Jun 05, 2009 12:32 pm
Contact:

UPNP external IP problem on v3.30

Fri Nov 13, 2009 10:15 am

I have a problem here with UPNP on v3.30, RB532A.
The external connection is PPPOE, and it reconnects after 7-8 days, getting a new public IP address.
But the UPNP does not set the NAT rules with the actual external IP, it sets a previous one (probably the IP the interface got the first time).

Problem can be solved by disabling then enabling the UPNP service, but it's back when the external IP changes again.

Any ideas what's wrong? Maybe a bugfix in the next release? (:
/ip upnp print 
                           enabled: yes
  allow-disable-external-interface: no
                   show-dummy-rule: yes
/ip upnp interfaces print detail 
Flags: X - disabled 
 0   interface=Digikabel type=external 

 1   interface=bridge-private type=internal 
/ip address print 
Flags: X - disabled, I - invalid, D - dynamic 
 #   ADDRESS            NETWORK         BROADCAST       INTERFACE              
 0   192.168.1.1/24     192.168.1.0     192.168.1.255   bridge-private         
 1 D 92.249.232.162/32  92.249.232.1    0.0.0.0         Digikabel              
/ip firewall nat print dynamic 
Flags: X - disabled, I - invalid, D - dynamic 
 0 D chain=dstnat action=dst-nat to-addresses=192.168.1.83 to-ports=8125 protocol=tcp dst-address=92.249.212.49 dst-port=8125 

 1 D chain=dstnat action=dst-nat to-addresses=192.168.1.83 to-ports=18428 protocol=udp dst-address=92.249.212.49 dst-port=18428 
 
duvi
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 70
Joined: Fri Jun 05, 2009 12:32 pm
Contact:

Re: UPNP external IP problem on v3.30

Mon Nov 23, 2009 10:17 am

Noone?

Who is online

Users browsing this forum: Google [Bot], HakanE, msatter and 130 guests