Community discussions

MikroTik App
 
Joro711
just joined
Topic Author
Posts: 5
Joined: Wed Feb 17, 2010 7:58 pm

RB450G problem

Wed Feb 17, 2010 8:47 pm

Sorry for my bad english.I have routerboard RB450G.Get internet from ISP by pppoe on WAN - port 1.Port 2,3,4 and 5 is bridge.After bridge i have Nanostation 2.On Nanostation 2 i have 5-6 clients with laptops.Internet on this laptops is perfect,but from RB450G to Nanostation dont have ping.Dont have ping from Nanostation to RB450G.Where is problem?
 
leonset
Member Candidate
Member Candidate
Posts: 256
Joined: Wed Apr 01, 2009 9:09 pm

Re: RB450G problem

Thu Feb 18, 2010 9:57 am

Maybe you have a NAT for everything that goes out from the 450G, but you shouldn't be doing NAT if you want to reach your internal LAN, and that includes the nanostation and laptops.

Disable the NAT rule, reboot the 450G (to flush the NAT table) and try again.
 
Joro711
just joined
Topic Author
Posts: 5
Joined: Wed Feb 17, 2010 7:58 pm

Re: RB450G problem

Thu Feb 18, 2010 10:16 am

Thanks.But how disable NAT for Nanostation?
 
leonset
Member Candidate
Member Candidate
Posts: 256
Joined: Wed Apr 01, 2009 9:09 pm

Re: RB450G problem

Thu Feb 18, 2010 10:36 am

I haven't used a nanostation, sou I can't help on that... I thought that nanostation was taking care of the wifi access/hotspot and the 450G was dealing with nat/firewall/routing.

Who is online

Users browsing this forum: abdulschizo, DMITRYB, fibracapi and 95 guests