Question about queues
Posted: Thu Apr 01, 2010 12:31 pm
Hi i would like to know somrthing about queues
I have setup two queues from the same subnet. The 1'st one is all traffic to 192.168.0.122.
The second queue is for all traffic.
What i would like to know will this works? Or will queue 2 interfere when queue 1 is active?
I tried this and queue 2 in 100% when transfering data to 192.168.0.122.
thanx
I have setup two queues from the same subnet. The 1'st one is all traffic to 192.168.0.122.
The second queue is for all traffic.
What i would like to know will this works? Or will queue 2 interfere when queue 1 is active?
Code: Select all
1 name="Derick1" target-addresses=192.168.13.0/24
dst-address=192.168.0.122/24 interface=all parent=none direction=both
priority=8 queue=default-small/default-small limit-at=1M/1M
max-limit=1M/1M burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small
2 name="Derick2" target-addresses=192.168.13.0/24 dst-address=0.0.0.0/0
interface=all parent=none direction=both priority=8
queue=default-small/default-small limit-at=256k/256k
max-limit=256k/256k burst-limit=0/0 burst-threshold=0/0
burst-time=0s/0s total-queue=default-small
thanx