MikroTik

Some strange.

Have BGP link to up-link 90.189.109.150 on this interface have ip addres from our network 194.190.72.1
src-nat
[Gunner@MikroTik] /ip firewall nat> print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=src-nat to-addresses=194.190.72.1
src-address-list=!Real
List Real - our real ip.

Have some servers they connect to MikroTik via PPPT. Whey have real ip some 194.190.72.3

[Gunner@MikroTik] /ppp secret> print
Flags: X - disabled
# NAME SERVICE CALLER-ID PASSWORD PROFILE REMOTE-ADDRESS
0 chat pptp ***** chat 194.190.72.3

PPTP clients connect on interface who has ip 10.50.0.3

On this servers all clients from up-link net have ip 194.190.72.1. What i need to do for. Need to all clients form up-link network have they own ip addres .

huh, could you make a drawing?.. I cannot clearly understand where those addresses are...

clients connect from network 90.189.0.0 to 194.190.72.3 and on 194.190.72.3 have ipadres 194.190.72.1

Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=src-nat to-addresses=194.190.72.1 ipv4-options=none
src-address-list=!Real


194.190.72.1 and 90.189.107.150 assigned on 1 interface.

and what is 10.50.0.3?..

напиши по русски, ато мы три дня будем угадывать твою мысль )))