Community discussions

MUM Europe 2020
User avatar
Member Candidate
Member Candidate
Topic Author
Posts: 103
Joined: Wed Feb 06, 2008 6:48 pm
Location: Clermont / France

Mirror port on RB493AH possible ?

Mon Jul 05, 2010 1:45 pm

Hi Everyone,

just tried to setup a mirror port on my RB493AH (trying, as the documentation states not all Chips in these systems support it.
The ICPlus175D does support Port Switching and Mirroring.

Anyway - here is what the system finds:
Flags: I - invalid 
 #   NAME             TYPE         MIRROR-SOURCE            MIRROR-TARGET            SWITCH-ALL-PORTS
 0   switch1          IC-Plus-178C none                     none                    
When I try to set this up though, it won't take it.
[RB493AH] /interface ethernet switch> set numbers=0 mirror-source=Server mirror-target=Mirror 
port mirroring not supported
Ok - I know that eventually the IC-Plus-178C does not support Mirror capability - but apparently the possibility is there.
Do I have to un-bridge the ports to be mirrored or what is the catch here ?

According to though, the 178C does not support port-mirroring.
Could you folks in that case, remove the menu option in the RouterOS ?

Thx for any hint.
User avatar
Frequent Visitor
Frequent Visitor
Posts: 94
Joined: Thu Jun 07, 2007 12:46 am

Re: Mirror port on RB493AH possible ?

Sat Jul 24, 2010 2:03 am

Try it on port 2-9.

Who is online

Users browsing this forum: aorsolic, imglombok and 90 guests