Page 1 of 1

Broadcom NetXtreme II Gigabit Ethernet BCM5709

Posted: Thu Aug 19, 2010 7:15 pm
by mehran
Hi
On HP DL360 G6 server there is NC382i adapter:

14E4.1639: Broadcom NetXtreme II Gigabit Ethernet BCM5709C
103C.7055: HP NC382i DualPort Multifunction Gigabit Server Adapter

It was working on Ver. 3.14, 4.10 and 4.11 after upgrade to 5.0 Beta6 network adapters gone.
Tried to use netinstall to downgrade and all of tested versions couldn't find network cards to install over ethernet
tested with netinstall: 3.0rc12, 3.30, 4.10, 4.11, 5.0beta2, 5.0beta6

following is PCI info on 4.11:
Device: 02:00.0
Vendor: Broadcom Corporation
Name: NetXtreme II BCM5709 Gigabit Ethernet (rev: 32)
Category: Ethernet controller
Vendor ID: 0x14e4
Device ID: 0x1639
IRQ: 7
Memory: f8000000-f9ffffff hex
IO: hex

Device: 02:00.1
Vendor: Broadcom Corporation
Name: NetXtreme II BCM5709 Gigabit Ethernet (rev: 32)
Category: Ethernet controller
Vendor ID: 0x14e4
Device ID: 0x1639
IRQ: 7
Memory: f6000000-f9ffffff hex
IO: hex

1- Does version 5 dropped support for BCM5709C?
2- Why the card works with 4.10 but Netinstall 4.10 couldn't detect NIC?

Re: Broadcom NetXtreme II Gigabit Ethernet BCM5709

Posted: Wed Aug 25, 2010 2:48 pm
by mehran
also tested with ROS 5.0beta2 but didn't work.

MT staff do you confirm this problem?

Re: Broadcom NetXtreme II Gigabit Ethernet BCM5709

Posted: Tue Sep 21, 2010 2:51 pm
by mehran
Working with RouterOS 5.0rc1

Thank you