Community discussions

MikroTik App
 
User avatar
NAB
Trainer
Trainer
Topic Author
Posts: 514
Joined: Tue Feb 10, 2009 4:08 pm
Location: UK
Contact:

PPP over serial port is dialing additional digits.

Thu Oct 07, 2010 7:58 pm

Hi,

RB411U ROS 4.11

I have a PPP session configured as follows
/interface ppp-client add \
  add-default-route=no allow="" data-channel=0 dial-command=ATDT1234567890 dial-on-demand=no \
  disabled=no info-channel=0 keepalive-timeout=10 max-mru=1500 max-mtu=1500 modem-init=ATZ \
  mrru=disabled name=ppp-out3 null-modem=no password="" phone="" pin="" port=\
  serial0 profile=default use-peer-dns=no user=""
However, when it does the dial, it actually sends the string:
ATDT1234567890*99***1#
This is, of course, screwing up the dial.

I have been through an export of the entire configuration export and there is no reference to the additional string "*99***1#", so why is it being added?

Many thanks.
 
SurferTim
Forum Guru
Forum Guru
Posts: 4637
Joined: Mon Jan 07, 2008 10:31 pm
Location: Miramar Beach, Florida

Re: PPP over serial port is dialing additional digits.

Thu Oct 07, 2010 9:59 pm

I'm not experienced with ppp, but I think I would try this:
/interface ppp-client
set X dial-command=ATDT
set X phone=1234567890

Who is online

Users browsing this forum: No registered users and 109 guests