Page 1 of 1

mt with pda

Posted: Wed Sep 21, 2005 8:32 am
by johnny
Hi all
I have an hp pda. When trying to get ip from mt 2.8 it can not.
This happens only on pda. On laptops its fine.
Any suggestion?

thanks

Posted: Wed Sep 21, 2005 2:22 pm
by Eugene
Check if you have dhcp client enabled. Does it work with other dhcp servers?

Posted: Thu Sep 22, 2005 2:03 am
by csickles
I have a HP 6315 PDA/Phone.
It works GREAT with my MikroTik at work and at home !!

You may want to check the wireless setings IE MAC filtering, band etc.

My iPAQ is only "B" si i have to support it at both locations.

Craig

Posted: Thu Sep 22, 2005 4:32 pm
by johnny
Hi

Yes, the pda works with other dhcp servers with
No problem. The mt is configured for hotspot.
Cookie enabled no wallgurden.

Is that what you have?
Thanks

Posted: Thu Sep 22, 2005 8:18 pm
by csickles
No I use it ad a "std client".
It connects via 2.4 (atheros), dhcp and source NAT.

I have full local and internet access.

Authentication is be MAC address to the wireless access point.
(MT Lic. Lvl 5)

I have set it up under hot spot and it works as well, no specail setup.

Craig