I have a existing Tower that has been in service several years. I have a RB433AH with 3 R52 cards. 2 are used for 2.4 wireless AP Bridge and 1 is 5ghz backhaul.
I am having problems with the 2.4's. the signal strength usually is in the 70 to low 80's. the floor use to be 95 to 100.
I the last 2 months the signal changes from mid 70's to over 100 and the floor drops to -60's for a few seconds.
today I changed out the whole box with new RB433ah and R52 cards. NO change still has the same problem. I have tried different channels but have not found one that is any better.
Any Ideas would be welcome!
Thanks in advance.