I was happily using my ADSL modem in bridge mode with my RouterBOARD for two years. The speed of the PPPoE connection was always as expected (8 Mbit/s). Now after upgrading to VDSL, I have a new modem. I have configured it to run in the bridge mode, but with RouterBOARD the maximum speed I get is only 13 Mbit/s, whereas if I configure pppd on my Linux server, I get 20 Mbit/s. The "official" speed is 25 Mbit/s, but noone has really attained that speed.
I have no queueing or speed limiting or anything else configured on the RouterBOARD and the CPU utilization is low. There is just no obvious reason for the speed difference.
Broken RB config:
Code: Select all
0 R name="pppoe-o2" max-mtu=1492 max-mru=1492 mrru=disabled interface=ether1 user="O2" password="O2" profile=default service-name="" ac-name="" add-default-route=yes dial-on-demand=no use-peer-dns=no allow=pap
Code: Select all
noipdefault
usepeerdns
defaultroute
hide-password
lcp-echo-interval 20
lcp-echo-failure 3
connect /bin/true
noauth
persist
mtu 1492
noaccomp
default-asyncmap
plugin rp-pppoe.so eth0
user "O2"