We have a x86 currently running v5.0rc4
I have downloaded the routeros-x86-5.5.npk, uploaded it to the files list and rebooted.
previous upgrades the .npk is removed and the firmware is updated, however this time the .npk remains and the firmware is unchanged.
our license is for up2 v7
with the .npk file uploaded we have 54.3MB of 60.7Mb used on the HDD.. there are no other files on the file list.
I have re downloaded firmware twice, once directly and again with the torrent.
both reboots the system has remained with old firmware.
Every time i reboot we are kicking off quite a large number of customers as this unit is our LNS.
Please advise.
Re: upgrade to 5.5 failing
what log says about update?
Re: upgrade to 5.5 failing
unfortanatly nothing.
as by the time i log in with winbox, 400-1000 pppoe sessions have filled the log file.
in a few hours im going to try upgrade to 5.0 first, then if that works 5.5
but i cant just now, as its 8pm, so peak time for us..
as by the time i log in with winbox, 400-1000 pppoe sessions have filled the log file.
in a few hours im going to try upgrade to 5.0 first, then if that works 5.5
but i cant just now, as its 8pm, so peak time for us..
Re: upgrade to 5.5 failing
Errr, isn't update output happening before routerOS even loads? I'm not sure there won't be any entry except on console itself.what log says about update?
-
-
BlackbirdSDH
just joined
- Posts: 5
- Joined:
- Location: Germany
Re: upgrade to 5.5 failing
I would disable pppoe server just before rebooting. After rebooting go to log and read the entry that is prompted for failing to install the new routeros version.
After reading the log file entry you can enable pppoe server so pppoe sessions can establish again.
After reading the log file entry you can enable pppoe server so pppoe sessions can establish again.
Re: upgrade to 5.5 failing
upgrading to 5.0 has worked.
so ill try to 5.5 later in the day, Customers dont like the 2 min outages i cause
maybe there was just a bug going from such an older firmware to the newer one.
so ill try to 5.5 later in the day, Customers dont like the 2 min outages i cause
maybe there was just a bug going from such an older firmware to the newer one.
Re: upgrade to 5.5 failing
Logs do get entered for upgrade error messages and are available once the router has fully booted.Errr, isn't update output happening before routerOS even loads? I'm not sure there won't be any entry except on console itself.what log says about update?
Re: upgrade to 5.5 failing
Ok, thanks.Logs do get entered for upgrade error messages and are available once the router has fully booted.Errr, isn't update output happening before routerOS even loads? I'm not sure there won't be any entry except on console itself.what log says about update?