Community discussions

MikroTik App
 
aprzybylski
just joined
Topic Author
Posts: 2
Joined: Tue Jul 19, 2011 1:37 pm

Trunking between RB750G and RB250GS

Tue Jul 19, 2011 1:49 pm

Rysunek1.jpg
Is it possible to configure the devices to obtain a configuration as shown? In particular, if I can all ports in RB750G used as a switch? It is possible to assign ip address?
You do not have the required permissions to view the files attached to this post.
 
fewi
Forum Guru
Forum Guru
Posts: 7734
Joined: Tue Aug 11, 2009 3:19 am

Re: Trunking between RB750G and RB250GS

Tue Jul 19, 2011 5:04 pm

You can't assign untagged VLANs to ports on either device.

Get a proper switch, use a router on a stick approach.
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.
 
LukasSVK
newbie
Posts: 40
Joined: Tue Dec 07, 2010 1:57 am
Location: Bratislava, Slovakia

Re: Trunking between RB750G and RB250GS

Tue Jul 19, 2011 9:41 pm

Hello, untagged port (access port to vlan) in routerboard switch chip (except RB250GS) does not work. Your setup is possible only with another switch between RB750G and RB250GS.


L.

Who is online

Users browsing this forum: sindy and 96 guests