Community discussions

MikroTik App
 
DarthLodis
just joined
Topic Author
Posts: 18
Joined: Sun Aug 24, 2008 12:34 am

High CPU usage (always on 100%)

Tue Nov 08, 2011 4:48 pm

Hi all!

I´m with a little problem that i can´t figure out how to solve this. I have a routerboard 435G (was a 433AH before, changed to see if solve the problem, but no sucess) with Hotspot and DHCP, and his CPU is always on 100% of usage, i'm using a MK v5.7 now (upgraded from 4.17, it was with the same issue on v4.17). i've upgraded to use Tool > Profile and see where's my CPU usage goes, Console and Management its always at high lvl of usage, how can i solve this problem, any ideas?
 
fbi
newbie
Posts: 26
Joined: Fri Nov 04, 2011 11:38 am
Location: Miskolc, Hungary

Re: High CPU usage (always on 100%)

Tue Nov 08, 2011 5:52 pm

Have you seen the /tool/profile? It shows the cpu usage of processes. You can check that which process use the most cpu time.
 
DarthLodis
just joined
Topic Author
Posts: 18
Joined: Sun Aug 24, 2008 12:34 am

Re: High CPU usage (always on 100%)

Wed Nov 09, 2011 2:13 pm

Hi fbi,

So, as i said before in tool>profile says me that Management and Console are on high lvls of usage, i will post a print.

We have Wireless, Firewall and Queuing use good part of, but these i know what they are, how can i solve this?
You do not have the required permissions to view the files attached to this post.
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3119
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: High CPU usage (always on 100%)

Thu Nov 10, 2011 2:19 am

Upgrade to 5.8, there has been issues on 5.7 in regard to 100cpu usage if dhcp server is enabled. Also make sure the firmware is update. Than test again..

What sometimes helps is to do a system reset and build the router completely like new after a power cycle...
 
juanguma3
just joined
Posts: 10
Joined: Sat Jul 16, 2011 8:06 pm

Re: High CPU usage (always on 100%)

Thu Nov 10, 2011 6:17 pm

Overcloking can help? Rb433 is tested to 800mhz, datasheet says
 
User avatar
Blue-Sky
just joined
Posts: 5
Joined: Fri May 30, 2008 1:01 pm

Re: High CPU usage (always on 100%)

Mon Sep 10, 2012 3:31 pm

Hi To all,

Have an resolution been given for this issue?

I am sitting with the same thing, and I am on the latest ROS, 5.20

But what I do not see is the processor bar (task manager next to the Lock) fully Green, is jumps around roughly between 5% and 20%

So could this be a bug?
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], kolopeter and 56 guests