I spent a good 30 minutes this morning trying to get rate limiting working on two interfaces using Simple Queues... all to no avail.
Can anyone enlighten me as to what I might be doing wrong?
/queue simple
add burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s direction=both disabled=no \
interface="IK" limit-at=0/0 max-limit=6M/6M name="IK" parent=none \
priority=8 queue=default/default total-queue=default
I've tried default, default-small, default-ethernet.
None of the values seem to have any affect on the Interface.
The interface IK is part of bridge1, if that makes any difference
/interface bridge port
add bridge=bridge1 disabled=no edge=auto external-fdb=auto horizon=none interface=\
"IK" path-cost=10 point-to-point=auto priority=0x80
add bridge=bridge1 disabled=no edge=auto external-fdb=auto horizon=none interface=\
Microwave path-cost=10 point-to-point=auto priority=0x80
add bridge=bridge1 disabled=yes edge=auto external-fdb=auto horizon=none interface=\
ether3 path-cost=10 point-to-point=auto priority=0x80
add bridge=bridge1 disabled=yes edge=auto external-fdb=auto horizon=none interface=\
ether4 path-cost=10 point-to-point=auto priority=0x80
add bridge=bridge1 disabled=no edge=auto external-fdb=auto horizon=none interface=\
ether5 path-cost=10 point-to-point=auto priority=0x80
/interface ethernet switch port
set "IK" vlan-header=leave-as-is vlan-mode=fallback
set Microwave vlan-header=leave-as-is vlan-mode=fallback
set ether3 vlan-header=leave-as-is vlan-mode=fallback
set ether4 vlan-header=leave-as-is vlan-mode=fallback
set ether5 vlan-header=leave-as-is vlan-mode=fallback
set switch1_cpu vlan-header=leave-as-is vlan-mode=fallback
ROS 5.6
EDIT: Looks like it might be a bug in ROS 5.6? But how do I upgrade? In the 4.x series you just uploaded the new file. I can't find such a place on the 5.x routers, and this router doesn't have Internet access.