Hello, I have a port forward from which has a dst nat and dst-adress=31.209.110.x and protocol=tcp and port= 8282 action=dstnat to-address=192.168.10.202 to port=8585 so that 8585.
1-The system is like this I have one router board rb450 and 4 ubnt sectors are connected to that board only,the antennas has the ips 192.168.10.x but they are in bridge mode so that I set their ips manually.Does that make any sense ? first I want to learn this anyway.
2-There also is 1.7 km away which has got a security camera in it's public ip and there is no routerboard the ubnt nanobridge is in router mode 192.168.225.x range and it's static ip is 192.168.254.254 and the camera has the ip 192.168.254.253 so that this antenna has also got a port forward to 192.168.254.253:80 and dst-port=8585
I hope I could explain.
3-Now I can connect to that camera anywhere by using the real ip 31.209.110.x but when I try to login the camera it says:connection error I think it has got a missin port what could it be ? and should I set it in my mikrotik ? or in that nanobridge
4-Last thing I want to ask how many users can I include on one rb450 connected and how much bandwidth ? and does that make sense if I only have a routerborad ? or should I buy a mikrotik for x86 to setup it to make server? Because my plan is to only use this routerboard give the internet up-to 200 people