O I AM USING 450G WITH SIMPLE QUEUES . ROUTER O/S VERSION 5.13 AND I NEEED SOLUTION THAT ALL LOCAL LAN PORTS SHOULD ACCESS PUBLIC WHICH ARE FREE ON WAN IS IT POSSIBLE IF SO PLS GIVE SOLUTION I AM BIGINER

sorry for my poor explanation

PLZ CHECK THE JPEG FILE ATTACHED BELOW

Hello,

You can make this with NAT. set all IPs to wan port (ether1) and create nat rules to the priate networks.

Read about NAT in the wiki.

Can u pls explai clearly i have added to wan interface and what should be done next what nat rule should be ritten ther pls help me

you can try this,

/ip firewall nat add chain=srcnat src-address=2.2.2.0/24 action=src-nat to-addresses=202.153.47.34
/ip firewall nat add chain=srcnat src-address=1.1.1.0/24 action=src-nat to-addresses=202.153.47.35
/ip firewall nat add chain=srcnat src-address=30.30.246.0/24 action=src-nat to-addresses=202.153.47.36

hello vik thanks for your reply i have done which u written but it is not working

Do you have a route to 0.0.0.0? With the correct gateway?

yes i did

Hello Hari,

have you checked internet on 2.2.2.0/24 pool.

or you can post your "export" data here....

yes i have checked net its comming. i should keep gateway as router ip