Community discussions

MUM Europe 2020
 
mathanadolphin
just joined
Topic Author
Posts: 9
Joined: Mon Feb 27, 2012 6:38 pm

RB433

Thu Mar 08, 2012 3:32 pm

hello how can i limit data rate for any user that connect wireless from RB433 if i have user ip.
 
User avatar
cbrown
Trainer
Trainer
Posts: 1840
Joined: Thu Oct 14, 2010 8:57 pm
Contact:

Re: RB433

Thu Mar 08, 2012 3:43 pm

Look at this. It should do what you need.

http://wiki.mikrotik.com/wiki/Manual:Qu ... ple_Queues
C.Brown

cbrown[at]ravenrocknetworks.com
MTCNA - MTCRE - MTCWE - MTCTCE
MTCSE - TRAINER-0179
 
gcs
Member Candidate
Member Candidate
Posts: 145
Joined: Tue May 18, 2010 10:06 pm
Location: Tyler, Texas USA

Re: RB433

Thu Mar 08, 2012 4:53 pm

from winbox open queues on left side.
click the + sign on upper left of screen.
type in a name for this user.
BE SURE to pit the ip address in target address space or all users will be set to this speed.
set the limit in the blocks for target upload and target download.
if the speed is not listed in pull down block the type in the speed. ex 1500k is 1.5 mb
click apply and/or ok and it is set
i hope this helps
 
mathanadolphin
just joined
Topic Author
Posts: 9
Joined: Mon Feb 27, 2012 6:38 pm

Re: RB433

Fri Mar 09, 2012 10:51 am

thanks
 
mathanadolphin
just joined
Topic Author
Posts: 9
Joined: Mon Feb 27, 2012 6:38 pm

Re: RB433

Sun Mar 11, 2012 4:14 pm

hello,i have ahardware problem where my RB433 is switch on but any ether (1,2 nor 3)it operate.what happened with it?

Who is online

Users browsing this forum: JustDobby, MSN [Bot], stevenuwm and 98 guests