we have a few hotspots running on MT. And now we want to centralize user authorization with freeradius server.
Everything is working fine (in testing enviroment), but I was not able to find out how to set freeradius and hotspot to change rx/tx limits separatly for every user.
On radius server there is a file /usr/share/freeradius/dictionary.mikrotik (which is loaded - I test it) and in this file there is attribute Mikrotik-Rate-Limit (described here: http://wiki.mikrotik.com/wiki/Manual:RADIUS_Client).
I hoped that this attribute can be used to set rate limits for single user. But setting up this attribute do not do anything special on hotspot (user logs in, internet is accessible, Max-All-Session works fine, but speed is limited only by hotspot global limit - not limit of this user).
Here is output from table radcheck:
6 adam Password == xxx
2 adam NAS-Identifier == mikrotik
5 adam Max-All-Session := 7200
8 adam Mikrotik-Rate-Limit := 64k/64k
RouterOS is 5.14
Is this setting correct? Do I have to do any other settings on hotspot side?