Hi,
After few reboots of both routers it seems it runs fine. However maybe sometimes, after boot, my LACP and VLAN interfaces are not ready so it want assigne this ip addres and create DAC route for interfaces. (it has IP address, but can not ping anybody on local network except itself, DAC route is missing, recreating IP address with /24 fixes the issue). Maybe this does not have nothing with VRRP at all.
First router (master):
/interface ethernet
set 0 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:A0:85:A5 master-port=none mtu=1500 name=wan speed=100Mbps
set 1 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:A0:85:A6 master-port=none mtu=1500 name=ether2 speed=100Mbps
set 2 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:A0:85:A7 master-port=none mtu=1500 name=ether3 speed=100Mbps
set 3 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:A0:85:A8 master-port=none mtu=1500 name=ether4 speed=100Mbps
set 4 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:A0:85:A9 master-port=none mtu=1500 name=ether5 speed=100Mbps
/interface vrrp
add arp=enabled authentication=none disabled=no interface=wan interval=2s mtu=1500 name=vrrp-wan on-backup="" on-master="" password=ss preemption-mode=yes priority=101 v3-protocol=ipv4 version=3 vrid=6
/interface bonding
add arp=enabled arp-interval=100ms arp-ip-targets="" disabled=no down-delay=0ms lacp-rate=30secs link-monitoring=none mii-interval=100ms mode=802.3ad mtu=1500 name=lacp-lan primary=none slaves=\
ether2,ether3,ether4,ether5 transmit-hash-policy=layer-2 up-delay=0ms
/interface vlan
add arp=enabled disabled=no interface=lacp-lan mtu=1500 name=lan use-service-tag=no vlan-id=2
add arp=enabled disabled=no interface=lacp-lan mtu=1500 name=chyperv use-service-tag=no vlan-id=3
/interface vrrp
add arp=enabled authentication=none disabled=no interface=lan interval=2s mtu=1500 name=vrrp-lan on-backup="" on-master="" password="" preemption-mode=yes priority=101 v3-protocol=ipv4 version=3 vrid=2
/ip address
add address=10.23.2.1/32 disabled=no interface=vrrp-lan network=10.23.2.1
add address=10.0.201.12/24 disabled=no interface=wan network=10.0.201.0
add address=10.0.201.10/32 disabled=no interface=vrrp-wan network=10.0.201.10
add address=10.23.2.3/24 disabled=no interface=lan network=10.23.2.0
add address=10.0.201.11/32 disabled=no interface=vrrp-wan network=10.0.201.11
Second router (slave):
/interface ethernet
set 0 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:AC:6E:A1 master-port=none mtu=1500 name=wan speed=100Mbps
set 1 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:AC:6E:A2 master-port=none mtu=1500 name=ether2 speed=100Mbps
set 2 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:AC:6E:A3 master-port=none mtu=1500 name=ether3 speed=100Mbps
set 3 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:AC:6E:A4 master-port=none mtu=1500 name=ether4 speed=100Mbps
set 4 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:AC:6E:A5 master-port=none mtu=1500 name=ether5 speed=100Mbps
/interface vrrp
add arp=enabled authentication=none disabled=no interface=wan interval=2s mtu=1500 name=vrrp-wan on-backup="" on-master="" password="" preemption-mode=yes priority=100 v3-protocol=ipv4 version=3 vrid=6
/interface bonding
add arp=enabled arp-interval=100ms arp-ip-targets="" disabled=no down-delay=0ms lacp-rate=30secs link-monitoring=none mii-interval=100ms mode=802.3ad mtu=1500 name=lacp-lan primary=none slaves=ether2,ether3,ether4,ether5 transmit-hash-policy=\
layer-2 up-delay=0ms
/interface vlan
add arp=enabled disabled=no interface=lacp-lan mtu=1500 name=lan use-service-tag=no vlan-id=2
add arp=enabled disabled=no interface=lacp-lan mtu=1500 name=chyperv use-service-tag=no vlan-id=3
/interface vrrp
add arp=enabled authentication=none disabled=no interface=lan interval=2s mtu=1500 name=vrrp-lan on-backup="" on-master="" password="" preemption-mode=yes priority=100 v3-protocol=ipv4 version=3 vrid=2
/ip address
add address=10.0.201.13/24 disabled=no interface=wan network=10.0.201.0
add address=10.23.2.1/32 disabled=no interface=vrrp-lan network=10.23.2.1
add address=10.0.201.10/32 disabled=no interface=vrrp-wan network=10.0.201.10
add address=10.23.2.4/24 disabled=no interface=lan network=10.23.2.0
add address=10.0.201.11/32 disabled=no interface=vrrp-wan network=10.0.201.11