How to loadbalancing more than 8 adsl lines on RB 493

adslking · Mon Jun 25, 2012 7:55 am

hi every body

i actually load balancing 8 adsl lines in RB 493 but now i want to add one more adsl line on the same RB 493 but no there unused Ethernet in RB 493 >>>>>> but i think that we can load balancing by using (10/100Mbps Desktop Switch) that we put 2 or more adsl lines in Switch and take cable from Switch and put in Ethernet in RB 493 and add VLAN in mikrotik interface >> but how to do this method

cbrown · Mon Jun 25, 2012 2:39 pm

Instead of setting up the load balancing for the ethernet interface like you did the others you will set it up on the VLAN interface.

adslking · Mon Jun 25, 2012 4:53 pm

Instead of setting up the load balancing for the ethernet interface like you did the others you will set it up on the VLAN interface.

Thank you v much

Do this but not work i want simply explain how to do this ... for example (how to add vlan ... after this how to setup in firewall mangle and routes

scampbell · Mon Jun 25, 2012 6:08 pm

This article may help

http://wiki.mikrotik.com/wiki/SwOS/Router-On-A-Stick

Dobby · Mon Jun 25, 2012 7:06 pm

Deleted because not related.

jibskg · Fri Jun 29, 2012 6:59 am

i recently bought a rb 1200 want to do exactly wht you did. want to hookup my 5 internet line to this router and use that for setup and network with hotspot. i am newbie in microtik, can give me some idea how i can accomplish this . will be greatly appreciated