Community discussions

 
oreggin
Member Candidate
Member Candidate
Topic Author
Posts: 102
Joined: Fri Oct 16, 2009 9:21 pm

Bridge and IPv6 address unreachable

Sat Jun 30, 2012 12:06 pm

Hi,

I testing an RB450G /w RoS 5.18. I configured a bridge interface as a loopback and it seems to if i configure IPv6 address on bridge then that address can't be reachable:
[admin@MikroTik] > /interface bridge print                                                                                                                                     
Flags: X - disabled, R - running 
 0  R name="loopback0" mtu=1500 l2mtu=65535 arp=enabled mac-address=AB:CD:EF:GH:IJ:KL protocol-mode=none priority=0x8000 auto-mac=no admin-mac=AB:CD:EF:GH:IJ:KL 
      max-message-age=20s forward-delay=15s transmit-hold-count=6 ageing-time=5m 
[admin@MikroTik] > /ipv6 address print                         
Flags: X - disabled, I - invalid, D - dynamic, G - global, L - link-local 
 #    ADDRESS                                     FROM-POOL INTERFACE                                                        ADVERTISE
 0  G 2001:beef::1/128                                      loopback0                                                        no       
[snip]
[admin@MikroTik] > ping 2001:beef::1
HOST                                     SIZE TTL TIME  STATUS                                                                                                                
                                                        timeout
                                                        timeout
                                                        timeout
                                                        timeout
    sent=4 received=0 packet-loss=100% 

[admin@MikroTik] >
Any idea how can i get a reachable IPv6 addressed loopback interface?

Cheers,
oreggin

Who is online

Users browsing this forum: No registered users and 111 guests