I'm trying to setup access ports on a RB750G.
I want Ether3,4,5 to be access ports for VLAN100.
VLAN100 is a VLAN interface on Ether2
Ether2 is a trunk port connected to an external switch
So in the end i have :
Ether2 = Trunk port with VLAN100, VLAN200, VLAN300 connected to an external switch.
Ether3,4,5 = access ports for VLAN100
How to do that with the RB750G hardware switch, not using a software bridge ?
Thanks for helping.