Community discussions

MUM Europe 2020
 
hkd
just joined
Topic Author
Posts: 23
Joined: Thu Apr 12, 2012 3:58 pm

Looking for help.

Wed Sep 05, 2012 4:37 am

Dear All,
I am new to ROS but i am looking for some help on the following setup, can you please give me some help ?
thank you very much.

I just bought a RB1100ahX2 and i want to have following setup.
1) ether1 ~ connect to WAN with dhcp client
2) ether3 connect to computer1 with IP: 192.168.38.38
3) ether6 connect to computer2 with 802.3ad load balancing with IP: 192.168.38.48
4) ether7 connect to computer2 with 802.3ad load balancing with IP: 192.168.38.48
5) ether8 connect to computer2 with 802.3ad load balancing with IP: 192.168.38.48
6) ether9 connect to computer2 with 802.3ad load balancing with IP: 192.168.38.48
7) ehter12 connect with computer3 with IP: 192.168.38.58
8 ) all computer1,2,3 can communicate with each other
9) Setup with PPTP Server and IPX server, which pptp client can connect to internet after connected.
10) PPTP and IPX client can communicate with those LAN computer
11) Only allow LAN computer can login to the ROS
12) Web-proxy enabled.
13) Firewall block all connection except IPX/PPTP also
14) NAT forward port 443, 21, 8000-9000 to computer1.

Can you please give me a hand
any help high appreciated.
Please contact me via hk_bin@yahoo.com.hk if needed.

Thank you very much.

Who is online

Users browsing this forum: dad2312, koplcorp, lastovsky, msatter, mscarpitti, vortex and 135 guests