Community discussions

MikroTik App
 
kazim
newbie
Topic Author
Posts: 27
Joined: Tue Feb 14, 2012 3:39 pm

bgp configuration between minkrotik and cisco router

Wed Sep 12, 2012 1:47 pm

Hello!

I working in an ISP and using Mikrotik.I have 40 customers which connected with private IP's (nating in mikrotik).Now i want to connect these client with public ip.My customers are demanding for some public ip pools like 29/, /28,/27 and so on.
I have got 180.94.83.16/28 for another ISP.They are using cisco router.
Now I buy a pool of public IP's from APNIC which are (103.15.238.0/23) and my AS Number is (AS58697) and the Remote (AS58330)(180.94.83.17 is the IP of remote side.

Now i want to configure BGP on my mikrotik server to provide public IP's to my customers.

My gateway is 180.94.83.17/28 and my mikrotik ip is 180.94.83.18/28

any can send the me the configuration. I shall be very thankful for this act of kindness
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6013
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: bgp configuration between minkrotik and cisco router

Fri Sep 14, 2012 3:48 pm

It is a simple BGP peering, look at this example,
http://wiki.mikrotik.com/wiki/Manual:Si ... ultihoming

Only difference is that it has two peers, you need only one.
 
kazim
newbie
Topic Author
Posts: 27
Joined: Tue Feb 14, 2012 3:39 pm

Re: bgp configuration between minkrotik and cisco router

Sat Sep 15, 2012 5:51 am

Thanks a lot for your kind reply
i will make one peer configuration if there is any issue i will inform you.


thanks again

Muhammad kazim

Who is online

Users browsing this forum: inteq and 131 guests