Community discussions

MUM Europe 2020
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

rb133c NOT responding after upgrade to 6.0rc3

Tue Oct 30, 2012 6:03 pm

Upgrade FAIL from 5.20 to 6.0rc3 (2012-10-30 14:55:15)

see console (in next my post) - during upgrade

after power cycle - routerboard boot but very long time to starting services
then - unable login via console, no PING (it seem like 100% cpu)
Last edited by honzam on Tue Nov 06, 2012 5:18 pm, edited 2 times in total.
LAN, FTTx, Wireless. ISP operator
 
jandafields
Forum Guru
Forum Guru
Posts: 1514
Joined: Mon Sep 19, 2005 6:12 pm

Re: rb133c dead after upgrade to 6.0rc3

Tue Oct 30, 2012 6:09 pm

Upgrade FAIL from 5.20 to 6.0rc3 (2012-10-30 14:55:15)

see console - during upgrade

after power cycle - routerboard boot but very long time to starting services
then - unable login via console, no PING (it seem like 100% cpu)

Do a netinstall back to 5.x to fix the router.

Please report this error to support@mikrotik.com
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: rb133c dead after upgrade to 6.0rc3

Tue Oct 30, 2012 6:31 pm

Console:
http://ulozobrazek.cz/view.php?filename ... 3_fail.jpg


I dont need netinstall, this is test on table :)
This is report
LAN, FTTx, Wireless. ISP operator
 
jandafields
Forum Guru
Forum Guru
Posts: 1514
Joined: Mon Sep 19, 2005 6:12 pm

Re: rb133c dead after upgrade to 6.0rc3

Tue Oct 30, 2012 6:47 pm

Console:
http://ulozobrazek.cz/view.php?filename ... 3_fail.jpg


I dont need netinstall, this is test on table :)
This is report

Ok, I see. I thought you were asking how to fix it.

All reports like this must be sent to support@mikrotik.com. Posting them on the forum won't get them to the right place.
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: rb133c dead after upgrade to 6.0rc3

Thu Nov 01, 2012 3:01 pm

I tried new build (2012-10-31 11:09:44) via netinstall
You do not have the required permissions to view the files attached to this post.
LAN, FTTx, Wireless. ISP operator
 
jandafields
Forum Guru
Forum Guru
Posts: 1514
Joined: Mon Sep 19, 2005 6:12 pm

Re: rb133c dead after upgrade to 6.0rc3

Thu Nov 01, 2012 3:07 pm

All reports like this must be sent to support@mikrotik.com. Posting them on the forum won't get them to the right place.
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: rb133c dead after upgrade to 6.0rc3

Thu Nov 01, 2012 4:08 pm

Do you known this button? Support is informed
You do not have the required permissions to view the files attached to this post.
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: rb133c dead after upgrade to 6.0rc3

Thu Nov 01, 2012 4:10 pm

Device is not "dead", because you can use Netinstall to downgrade to v5.21. We will see why v6 doesn't work, but remember - RB133c only has 16MB of RAM and was made some 7 years ago ...
No answer to your question? How to write posts
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: rb133c dead after upgrade to 6.0rc3

Thu Nov 01, 2012 5:17 pm

I known. Downgrade to 5.21 works well. Rb133c is very OLD product, but you newer say -> ROS 6.0 is incompatible with old MIPSLE boards
:)

I hope that ROS 6.0 will work with rb532 and rb133C. If not please warn users on webpage...
LAN, FTTx, Wireless. ISP operator
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: rb133c dead after upgrade to 6.0rc3

Tue Nov 06, 2012 5:12 pm

build from this day
You do not have the required permissions to view the files attached to this post.
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: rb133c dead after upgrade to 6.0rc3

Wed Nov 07, 2012 8:31 am

build from this day
Also on RB133c? Yes, because we have made no changes yet.
but you newer say -> ROS 6.0 is incompatible with old MIPSLE boards
it works on all other MIPS-LE boards because they have more RAM. RB113C and RB112 are the only exceptions.
No answer to your question? How to write posts
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: rb133c dead after upgrade to 6.0rc3

Wed Nov 07, 2012 9:09 am

it works on all other MIPS-LE boards because they have more RAM. RB113C and RB112 are the only exceptions.
And will work ROS6 in the future on rb133c and rb112 ?
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: rb133c NOT responding after upgrade to 6.0rc3

Wed Nov 07, 2012 9:11 am

It works if you install only System package. Check which packages you can omit, and install only the very basics. It could work then.
No answer to your question? How to write posts
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: rb133c NOT responding after upgrade to 6.0rc3

Wed Nov 07, 2012 11:29 am

I can try it, but where download all packages rc3? On prerelase is only mipsle-6.0rc3.npk
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: rb133c NOT responding after upgrade to 6.0rc3

Wed Nov 07, 2012 11:31 am

currently nowhere. we will see what we can do.
No answer to your question? How to write posts
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: rb133c NOT responding after upgrade to 6.0rc3

Tue Nov 13, 2012 4:08 pm

Normis, now I try install only system package 6.0RC3

The same problem - kernel panic
You do not have the required permissions to view the files attached to this post.
LAN, FTTx, Wireless. ISP operator
 
boardman
Member Candidate
Member Candidate
Posts: 260
Joined: Fri May 28, 2004 11:10 pm
Location: Mexico
Contact:

Re: rb133c NOT responding after upgrade to 6.0rc3

Fri Jun 28, 2013 12:20 am

Too late, few RB133c unuseable after ROS6.1 installed ... replaced some by RB411 and some with NSM5.

Cost, crew, time, upset customers involved ..... Next time please ADVICE on download or changelog.

JB
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2303
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: rb133c NOT responding after upgrade to 6.0rc3

Fri Jun 28, 2013 9:17 am

And what is this?
The first post was written at a time when no warning on download page
You do not have the required permissions to view the files attached to this post.
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: rb133c NOT responding after upgrade to 6.0rc3

Fri Jun 28, 2013 9:29 am

This note is there, since RouterOS v6 rc1 was released
No answer to your question? How to write posts
 
boardman
Member Candidate
Member Candidate
Posts: 260
Joined: Fri May 28, 2004 11:10 pm
Location: Mexico
Contact:

Re: rb133c NOT responding after upgrade to 6.0rc3

Fri Jun 28, 2013 4:42 pm

Ok, thanks

Who is online

Users browsing this forum: maximo, MSN [Bot] and 122 guests