I put in my RB751U 2HnD to version 6.0-rc3 and noticed that processing varies from 5% to 100% with only one client in the wireless with very low traffic. In this New Terminal also slow.
Firmware Version 3.0
could you make a support output file from your setup?
Also what kind of that 25mbps traffic it is? Torrent or some file transfer - so we could try to reproduce it?
, I also wished ever 6.0 or 5.21 in addition to put but I dare not because of my cpu, and the router itself becomes slower, I fear it. Was this version as 5.18 and then happened to be such a thing as the cpu at 100% and the router dizzyuldis
I have similar problem when intensive traffic goes over Wi-Fi on the device CPU goes to the sky and RB751U hangs.I am seeing lots of cpu being used by the flash process on a 751U as well.
Tried to make a supout but it didn't like it - tested on dev version, still the same
I'm testing by doing a wget over wifi on a single stream, into a pppoe client onto my DSL.
Seeing flash process jumping up to around 35% in normal running, and then cpu maxing at 100% when doing a simple download.
Update managed to generate a supout, sending to support
Nick.