Page 1 of 1

RouterOS OVPN Server - Routing

Posted: Fri Nov 16, 2012 12:00 pm
by 1001001
Hello everybody,

we've set-up a RouterOs OVPN Server. It's so far the only problem is that it's routing traffic coming from the internet through the wrong ip address.

Routingtable:
0 A S  0.0.0.0/0                          xxx.xxx.xxx.1    1
1 A S  10.0.10.0/24                       xxx.xxx.xxx.1     1
2 ADC  10.0.10.123/32     10.10.10.1      <ovpn-client>    0
 [...]
13 ADC  xxx.xxx.xxx.0/24    xxx.xxx.xxx.242  ether6    0
                                           ether2
Address:
 1   xxx.xxx.xxx.241/24  xxx.xxx.xxx.0    ether2                                   
 2   xxx.xxx.xxx.242/24  xxx.xxx.xxx.0    ether6                                   
[...]                       
13 D 10.10.10.1/32      10.0.10.123     <ovpn-client>
VPN traffic comes in on ether2 and should go out through ether6 but only ether2 shows traffic in Tx and Rx, ether6 only shows traffic in Rx.

What are we missing?

Best regards

1001001

Re: RouterOS OVPN Server - Routing

Posted: Sun Nov 18, 2012 1:44 pm
by 1001001
anyone any idea?

Re: RouterOS OVPN Server - Routing

Posted: Sun Nov 18, 2012 5:08 pm
by 1001001
solved.