Community discussions

 
estdata
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 99
Joined: Mon Feb 20, 2012 9:05 pm
Contact:

v6 rc8 released

Mon Feb 04, 2013 6:46 pm

What's new in 6.0rc8 (2013-Feb-04 13:25):

*) ppp,pppoe,pptp,l2tp,sstp - only 2 change mss mangle rules are created for all ppp interfaces;
*) wireless - fixed AES encryption speed issues (upgrade suggested);
*) dhcpv6 server - handle info requests;
*) webfig - compressed all html resource files, speeds up opening of webfig page;
*) console - reduced width of address column in '/user print';
*) simple queues requires target arg to be specified when adding;
*) do not count packets for unknown protocols as rx_dropped;
*) snmp - provide POE info;
*) improved cpu usage reporting on CCR boards;
*) improved interface reading performance;
*) changed CLI interface order - first are ethernets, second wireless, third everything else.
Within group interfaces are ordered by name;
*) interfaces are deleted much faster, could be bottleneck on systems with many ppp sessions;
*) pptp,l2tp,6to4 tunnel encapsulation/decapsulation now resets packet marks to
have consistent behavior across tunnels;
*) fix simple queue interface matching when doing encapsulation in some tunnel,
could result in double accounted packets;
*) ip/ipv6 firewall has all-ether,all-wireless,all-vlan,all-ppp interface matchers
*) queue limits could be inaccurate for large limits (100M or more);
*) added initial OpenFlow support
don't forget to give me karma if got help
....
 
estdata
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 99
Joined: Mon Feb 20, 2012 9:05 pm
Contact:

Re: v6 rc8 released

Mon Feb 04, 2013 6:52 pm

and I have an idea and proposal development, by means of the rc9 version will not be able to develop a graphical interface to the DDoS attack against protection?
don't forget to give me karma if got help
....
 
w0lt
Member
Member
Posts: 484
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: v6 rc8 released

Mon Feb 04, 2013 7:38 pm

Not able to update via "System/Packages" yet.. still thinks 6.0rc7 is current.
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "

Image
 
jcem
Member Candidate
Member Candidate
Posts: 137
Joined: Sun May 24, 2009 4:41 pm
Location: Grebbestad, Sweden

Re: v6 rc8 released

Mon Feb 04, 2013 7:41 pm

"Interface window" in winbox stops sending data. When making
a new connection the windows is empty.

Also no SNMP - CPU, DISK

RB433AH ROS6.0RC8 4feb13

This was not the case with the friday 1feb13 release where SNMP shot to 100%

Jörgen
 
mars
Member Candidate
Member Candidate
Posts: 228
Joined: Sun Mar 14, 2010 1:43 pm

Re: v6 rc8 released

Mon Feb 04, 2013 8:29 pm

still getting

System rebooted because of ping watchdog timeout

all rbs with ros6.0rc8

happens every couple of hours
 
estdata
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 99
Joined: Mon Feb 20, 2012 9:05 pm
Contact:

Re: v6 rc8 released

Mon Feb 04, 2013 8:35 pm

still getting

System rebooted because of ping watchdog timeout

all rbs with ros6.0rc8

happens every couple of hours
watchdog disabled(off) and what is new ?
don't forget to give me karma if got help
....
 
Attila
newbie
Posts: 33
Joined: Sun Mar 18, 2012 1:57 pm

Re: v6 rc8 released

Mon Feb 04, 2013 9:08 pm

Dear Normis!

Multicast routing (PIM-SM) same source (IPTV channel) with different client IP (Set Top Box) not working in CCR1036 (RC6,RC7,RC8). Same ROS version (RC6,RC7,RC8) and same configuration (1. RP, 3. Interface) working correctly in RB2011.

Please investigate this problem...


Thx.

Attila
 
FutileNetworks
newbie
Posts: 36
Joined: Tue Jan 15, 2013 9:14 pm

Re: v6 rc8 released

Mon Feb 04, 2013 10:43 pm

20:39:03 route,bgp,error tcp-md5-key currently cannot be enabled on CCR devices

Why wasn't this mentioned in the Changelog? When will it be fixed and when it is please include it in the Changelog!! My router is pretty much useless without this.

edit: found post where it will be fixed in rc9, thanks.
Last edited by FutileNetworks on Tue Feb 05, 2013 5:39 am, edited 1 time in total.
 
mars
Member Candidate
Member Candidate
Posts: 228
Joined: Sun Mar 14, 2010 1:43 pm

Re: v6 rc8 released

Mon Feb 04, 2013 11:33 pm

with watchdog off the rb411 runs out of memory and hangs


and connection tracking off with 1 filter rule connection tracking is still on
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6 rc8 released

Mon Feb 04, 2013 11:39 pm

with watchdog off the rb411 runs out of memory and hangs
and connection tracking off with 1 filter rule connection tracking is still on
post there:
/system resource print
/system routerboard print
LAN, FTTx, Wireless. ISP operator
 
User avatar
ema
just joined
Posts: 21
Joined: Mon Apr 14, 2008 5:13 pm
Location: Poland, Warsaw

Re: v6 rc8 released

Tue Feb 05, 2013 12:53 am

I found firewall problem in rc8 - CCR1036
 /ip fire nat pri                          
Flags: X - disabled, I - invalid, D - dynamic 
 0   chain=srcnat action=src-nat to-addresses=185.15.0.3 src-address=192.168.24.0/22 

 1   chain=srcnat action=src-nat to-addresses=185.15.0.4 src-address=192.168.14.0/23 
 /ip fire fil pri
Flags: X - disabled, I - invalid, D - dynamic 
 0  chain=output action=log protocol=icmp log-prefix=""
and I get on output:
22:45:22 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.72.22->10.10.72.1, len 56 
22:45:23 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.70.8->10.10.70.3, NAT (10.10.70.8->185.15.0.5)->10.10.70.3, len 50 
22:45:23 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.72.22->10.10.72.1, len 50 
22:45:24 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.70.8->10.10.70.3, NAT (10.10.70.8->185.15.0.5)->10.10.70.3, len 50 
22:45:24 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.72.22->10.10.72.1, len 50 
22:45:25 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.70.8->10.10.70.3, NAT (10.10.70.8->185.15.0.5)->10.10.70.3, len 50 
22:45:25 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.72.22->10.10.72.1, len 50 
I had a rule that NAT 10.10.0.0/16 to 185.15.0.5 but it was deleted.
I have to disable all nat rules to switch off nat this packets. After switching on I still have NAt 10.10.0.0/16 to 185.15.0.5
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1818
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6 rc8 released

Tue Feb 05, 2013 5:40 am

*) ip/ipv6 firewall has all-ether,all-wireless,all-vlan,all-ppp interface matchers

THANK YOU, THANK YOU, THANK YOU Mikrotik :)
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
engineertote
Member Candidate
Member Candidate
Posts: 177
Joined: Tue May 19, 2009 1:36 pm

Re: v6 rc8 released

Tue Feb 05, 2013 9:49 am

in the download page there was RC08 few minutes back , now its RC07 only ??
Ahmed
MTCNA , MTCTCE , MTCRE , MTCINE
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6 rc8 released

Tue Feb 05, 2013 9:53 am

RC8 has a critical issue with Certificates. We temporarily pulled it off the website. If you don't use certificates, you can keep using RC8
No answer to your question? How to write posts
 
przent
newbie
Posts: 40
Joined: Sat Feb 02, 2013 9:11 pm

Re: v6 rc8 released

Tue Feb 05, 2013 11:46 am

The "All packages" link for 6.x is missing completly after your pull back operation. I`ve just bricked a testboard with partitions on it and there is no 6.x (all packages) to download and use netinstall... Lucky that that was a test board...
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6 rc8 released

Tue Feb 05, 2013 11:48 am

The "All packages" link for 6.x is missing completly after your pull back operation. I`ve just bricked a testboard with partitions on it and there is no 6.x (all packages) to download and use netinstall... Lucky that that was a test board...
ALL files from RC9 with fixed certificates:
http://www.mikrotik.com/download/share/ ... 6.0rc9.zip
No answer to your question? How to write posts
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6 rc8 released

Tue Feb 05, 2013 1:10 pm

ema

Please make sure you have not deleted firewall rule by yourself accidentally. We have upgraded many routers to rc8, and NAT rules were untouched on every of them.
For disabled NAT and logging wrong behavior, if you think that v6.0rc8 does not work properly with NAT or not NAT packets, please make support output file and send it to support department (support@mikrotik.com), thank you very much for help.
 
pchaxor
just joined
Posts: 9
Joined: Tue Dec 04, 2012 5:54 pm

Re: v6 rc8 released

Tue Feb 05, 2013 2:34 pm

Where did they move the Beta downloads to?
I am not able to find them... weird.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6 rc8 released

Tue Feb 05, 2013 2:56 pm

Where did they move the Beta downloads to?
I am not able to find them... weird.
what beta downloads ?
No answer to your question? How to write posts
 
User avatar
YazzY
Member Candidate
Member Candidate
Posts: 140
Joined: Fri May 28, 2004 3:26 pm
Location: Norway, Østfold
Contact:

Re: v6 rc8 released

Tue Feb 05, 2013 3:00 pm

All the RC downloads are gone from the download website.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6 rc8 released

Tue Feb 05, 2013 3:42 pm

All the RC downloads are gone from the download website.
wait for fix, or use pre-release rc9 http://www.mikrotik.com/download/share/ ... 6.0rc9.zip
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6 rc8 released

Tue Feb 05, 2013 3:44 pm

All the RC downloads are gone from the download website.
it has RC7. As Honzam also repeated, you can either use RC7, or use the pre release of RC9. Of if you don't use certificates, keep using the RC8
No answer to your question? How to write posts
 
hci
Long time Member
Long time Member
Posts: 594
Joined: Fri May 28, 2004 5:10 pm

Re: v6 rc8 released

Tue Feb 05, 2013 5:57 pm

it has RC7. As Honzam also repeated, you can either use RC7, or use the pre release of RC9. Of if you don't use certificates, keep using the RC8
What do you mean by use certificates? The only way I think I use them is connecting securely with winbox and ssh to the Mikrotik. Is that an issue?
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 222
Joined: Tue Mar 08, 2011 2:52 am
Location: Vaprio d'Agogna (NO) - Italy
Contact:

Re: v6 rc8 released

Tue Feb 05, 2013 8:11 pm

I hope it's not too much off-topic. Where can I find mipsbe, PPC and TILE 6.0rc8 (all_packages .zip files)? Anyone willing to share their downloads? I don't need it for production, just I didn't download it in time, and now that's pulled, it would leave an empty hole in my ROS collection! :-)
 
pchaxor
just joined
Posts: 9
Joined: Tue Dec 04, 2012 5:54 pm

Re: v6 rc8 released

Tue Feb 05, 2013 8:25 pm

Ok they were gone .. RC that is so it must have got fixed since I posted. Looks fine now.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6 rc8 released

Tue Feb 05, 2013 10:17 pm

I hope it's not too much off-topic. Where can I find mipsbe, PPC and TILE 6.0rc8 (all_packages .zip files)? Anyone willing to share their downloads? I don't need it for production, just I didn't download it in time, and now that's pulled, it would leave an empty hole in my ROS collection! :-)
http://www.mikrotik.com/download/share/ ... 6.0rc8.zip
LAN, FTTx, Wireless. ISP operator
 
onnoossendrijver
Member
Member
Posts: 418
Joined: Mon Jul 14, 2008 11:10 am
Location: The Netherlands

Re: v6 rc8 released

Sun Feb 10, 2013 2:56 pm

*) wireless - fixed AES encryption speed issues (upgrade suggested);
Thanks! This is a GREAT improvement! On some devices: before: <1 mbit/s, now: 160 mbit/s.
Linux/network engineer: ITIL, LPI1, CCNA R+S, CCNP R+S, JNCIA, JNCIS-SEC

Who is online

Users browsing this forum: No registered users and 25 guests