I am running a network with many fiber optic connections and I wish to run PPPoE server to make my AAA. The problem is that for conections over 2,5 Mbps I can't deliver the full bandwidth to the client. I made some testes running this configuration over FreeRadius:
So I wish that my client get into the network and use 10Mbps download and 2 Mbps upload. The problem is download for this client did not get over 2,5 Mbps. Running some configurations I found the problem is over the queue type and it's kind. It's set to use pfifo with 10 pkg. I tried different configurations and I got into pfifo 100 pkg as the best for download but, for some unknow reasons, my upload get crazy and go over the limited amount something about 60% for speed under 1 Mbps (going to 1,6 Mbps of total upload bandwidth) and something about 35% for speed over 1 Mbps.
Code: Select all
Mikrotik-Rate-Limit = 2000k/10000k
This is making my network full of upload and I don't want this type of traffic over what my client has for the limit.
Wich should be the best configuration for this Queue Type usage over 2,5 Mbps?