I have one router that connect to the internet
connect to him 3 more devices - I want to be able to get to them from away
I know how to do NAT to 1 device
but how can I do it to 3 devices?
all of them use the same port ( but different address : 192.168.1.1,192.168.1.2,192.168.1.3, port 554)
can I do this?
Thanks ,
-
-
CelticComms
Forum Guru
- Posts: 1765
- Joined:
Re: I want to do NAT for 3 devices,possible?
Use different ports externally and map each to the same port internally - but different device.
Re: I want to do NAT for 3 devices,possible?
can you show me 1 example?
how do to NAT to 192.168.1.2 and I change the port to 1500?
Do I need to change dst port and in the action port?
how do to NAT to 192.168.1.2 and I change the port to 1500?
Do I need to change dst port and in the action port?
-
-
shahbazian
Trainer
- Posts: 169
- Joined:
- Location: Iran
- Contact:
Re: I want to do NAT for 3 devices,possible?
David1234
If your public ip address is 1.2.3.4 and your private addresses is 192.168.1.1, 192.168.1.2, 192.168.1.3 you must add this rules:
By adding this rules every tcp traffic come to 1.2.3.4:1 then go to 192.168.1.1:100
If your public ip address is 1.2.3.4 and your private addresses is 192.168.1.1, 192.168.1.2, 192.168.1.3 you must add this rules:
Code: Select all
/ip firewall nat
add chain=dstnat dst-address=1.2.3.4 protocol=tcp dst-port=1 action=dst-nat to-addresses=192.168.1.1 to-ports=100
add chain=dstnat dst-address=1.2.3.4 protocol=tcp dst-port=2 action=dst-nat to-addresses=192.168.1.2 to-ports=100
add chain=dstnat dst-address=1.2.3.4 protocol=tcp dst-port=3 action=dst-nat to-addresses=192.168.1.3 to-ports=100