Community discussions

MikroTik App
 
uldis
MikroTik Support
MikroTik Support
Topic Author
Posts: 3431
Joined: Mon May 31, 2004 2:55 pm

Routing/ospf v2.9.13 and v2.9.14 not working!

Mon Feb 27, 2006 6:28 pm

There is a problem with Routing/OSPF in 2.9.13 and in v2.9.14. If you are using older versions, then do not upgrade now, you should wait till v2.9.15 which will contain the fix for the routing.
 
User avatar
HarvSki
Member
Member
Posts: 388
Joined: Fri May 28, 2004 3:37 pm
Location: London, UK

Wed Mar 01, 2006 6:53 pm

Must be working a bit as I've 2 routers using OSPF between them, only one path though I suppose :lol:
 
oook
just joined
Posts: 12
Joined: Sun Feb 26, 2006 8:58 pm

Re: Routing/ospf v2.9.13 and v2.9.14 not working!

Fri Mar 03, 2006 8:56 pm

There is a problem with Routing/OSPF in 2.9.13 and in v2.9.14. If you are using older versions, then do not upgrade now, you should wait till v2.9.15 which will contain the fix for the routing.
When will be 2.9.15 available?
 
tbcnetinc
just joined
Posts: 5
Joined: Mon Mar 06, 2006 4:49 am

Is there a site to download older Mikrotik versions?

Mon Mar 06, 2006 6:04 pm

All I've ever seen is the current version on the web site. Is there an archive site for times when we need to downgrade?
 
Mapik
Frequent Visitor
Frequent Visitor
Posts: 90
Joined: Tue Nov 29, 2005 11:08 am

Tue Mar 07, 2006 3:37 pm

 
tbcnetinc
just joined
Posts: 5
Joined: Mon Mar 06, 2006 4:49 am

Didn't work

Tue Mar 07, 2006 4:55 pm

 
gheeres
just joined
Posts: 8
Joined: Sat May 29, 2004 3:03 pm

404 Error, NOT Found

Thu Mar 09, 2006 12:19 am

Argh. Trying to make sure I didn't have a problem with my wireless PRISM2 cards...so upgraded to lastest version last evening 2.9.13 (RB532). Today noticed OSPF routes dropping... restarted interfaces...things worked again...but then down again a few hours later.

Hmm... Found the announcement too late...

Now I can't find previous version for downgrade. :(

http://www.mikrotik.com/download/router ... 2.9.12.npk

Gives 404 (Not Found) error.
 
truzicka
just joined
Posts: 7
Joined: Thu Dec 08, 2005 5:16 pm

This might be part of the same problem

Thu Mar 09, 2006 3:41 am

I've also noticed that since I installed 2.9.14 users on the hotspot network that have been bypassed get disconnected from their shares to other computers. Also if there is no activity for a while and then you try and ping the router two of the first 4 replies get dropped, but on subsequent pings, replies are normal. Seems as there is now a timeout even though they have been bypasses. On the shares I was sitting at a computer on the 10.5.50 hotspot network which was was on the IP binding list as bypassed with a network share to the 192.168. network and kept getting the error that I'd lost the share or the disk was full but could reconnect right away. I've been using this setup for months and have never had this problem until the upgrade. Will try downgrading tonight.
 
User avatar
gottin
Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Fri Feb 25, 2005 8:33 am
Location: Bulgaria
Contact:

Thu Mar 09, 2006 7:41 pm

What about the RIP protocol? Does anyone have experienced problems with it.

I had one 2.9.12 and two 2.8.26 MTs runing rip among them. However, the 2.9.12 MT started receiving different gateways for an certaing address advertices by one of the 2.8.26 MikroTiks. For example, in one moment 2.9.12 is seing 192.168.1.20 advertised by MT1 (2.8.26) , but the next moment you can see 192.168.1.20 on the other (2.8.26 MT). All the time 192.168.1.20 is a connected address for one of the MTs (2.8.26) which are working as AccessServers.

I upgraded my router from 2.9.12 to 2.9.14 however I continue to experience the same problems :(. Any ideas if it's a problem of the versions?

Who is online

Users browsing this forum: benkej, MSN [Bot], padawanque, saaymae, scorptec and 200 guests