Community discussions

MUM Europe 2020
 
User avatar
Real
just joined
Topic Author
Posts: 23
Joined: Thu Jul 23, 2009 7:31 pm
Location: Lithuania ,Kaunas

inside and outside addresess in same interface, please help

Wed Mar 20, 2013 10:36 am

Hi,
I have question, i use mikrotik software on 86x platform,
I need to asign outside addresses to my customers (i got 510 ip's),
at this time i use 10 outside addresses for all my customers (more than 400 + equipment ip's),
all adresses NAT'ed,
todays network scheme:

outside adresses 1.1.1.1 - 1.1.1.10 > NAT > inside addresses 192.168.0.0 - 192.168.2.255 ( + 192.168.3.1 - 192.168.4.255 equipment ip's)

i want to asign outside addreses directly to customers interfaces, e.g.: 2.2.2.1 - 2.2.3.254
and leave equipment local addresses in local network.

Is it possible to do without netmap ?
 
CelticComms
Forum Guru
Forum Guru
Posts: 1766
Joined: Wed May 02, 2012 5:48 am

Re: inside and outside addresess in same interface, please h

Wed Mar 20, 2013 12:20 pm

It is possible but the details of the possible options would depend on your network topology.
Interlynx | Networking and Information Security Consultants & Trainers | Email: routerlynx@gmail.com
BGP | EIGRP | OSPF | MPLS | Firewall | VPN | IPsec | Multicast | QOS | IPv4/6 | STP | VLAN | PON | AE | M2M | and more!

 
User avatar
Real
just joined
Topic Author
Posts: 23
Joined: Thu Jul 23, 2009 7:31 pm
Location: Lithuania ,Kaunas

Re: inside and outside addresess in same interface, please h

Tue Mar 26, 2013 10:13 am

It is possible but the details of the possible options would depend on your network topology.
topology is simple, NAT > and lot of clients using few outside addresses (srcnat), do you can provide basic details of this configuration ?

Who is online

Users browsing this forum: Bing [Bot], FurfangosFrigyes and 110 guests