Community discussions

 
digitalpilot
Trainer
Trainer
Topic Author
Posts: 20
Joined: Sun Apr 07, 2013 6:10 am
Location: Albuquerque, NM US
Contact:

How to have both NAT and Non-NAT on same board

Sun Apr 07, 2013 6:27 am

Hi,

I have a RB 751 configured as such.

Ether 1 WAN uplink with a public /30 for ptp back to our aggregation router

Ether 5 inside network, needs NAT to outside WAN IP

Ether 4 inside network with PUBLIC IP subnet. This subnet is statically routed to the RB's WAN via our aggregation router.

Issue is that traffic originating on Ether 4 is still NAT'd to the WAN IP. I need it to be on the /27 we have on Ether4.

How do I do this?

Many thanks
 
User avatar
nickshore
Member
Member
Posts: 472
Joined: Thu Mar 03, 2005 4:14 pm
Location: Suffolk, UK.
Contact:

Re: How to have both NAT and Non-NAT on same board

Sun Apr 07, 2013 4:29 pm

Check your NAT rule, and make sure that it is only NATing src addresses in the private block.
Nick Shore MTCNA MTCWE MTCRE MTCINE MTCTCE
LinITX.com - MultiThread Consultants
Get your MikroTik RBs and Training: http://linitx.com/brand/mikrotik
Official UK MikroTik Distributor
IRC chan: #routerboard on irc.z.je (IPv4 and IPv6)

Who is online

Users browsing this forum: No registered users and 105 guests