I´ve read all the postings regarding openVPN & PPPoE-Client so far, but let me again ask some questions....
I´m running v6.0rc13/14 on x86 with DSL-Modem connected via PPPoE-Bridge & Client.
Therefore I´m running in PPPoE-crashes as described in other postings before.
So is there a way to run openVPN with this config right now ?
Here are some specific informations about my config:
Code: Select all
[admin@MikroTik] /interface> print
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU L2MTU MAX-L2MTU
0 R ;;; BLUE: Secondary TCP/IP-Interface (WLAN/Guest)
BLUE ether 1500 7152
1 R ;;; GREEN: Primary TCP/IP-Interface
GREEN ether 1500 7152
2 R ;;; ORANGE: Tertiary TCP/IP-Interface (DMZ/Reserved)
ORANGE ether 1500 1600
3 RS ;;; RED: TCP/IP-Interface <=> DSL-Modem & PPPoE-Interface (INTERNET)
RED ether 1500 7152
4 R ;;; PPP-Client UMTS <=> INTERNET
PPP-UMTS ppp-out 1500
5 R ;;; PPPoE-BRIDGE : => INTERNET
PPPoE Bridge bridge 1500 7152
6 R ;;; PPPoE-Client T-Online: RED <=> Bridge PPPoE DSL <=> INTERNET
T-Online PPPoE via PPPoE-Bridge ... pppoe-out 1492
Code: Select all
[admin@MikroTik] /interface bridge> print
Flags: X - disabled, R - running
0 R ;;; PPPoE-BRIDGE : => INTERNET
name="PPPoE Bridge" mtu=1500 l2mtu=7152 arp=enabled
mac-address=00:30:18:A3:E2:39 protocol-mode=none priority=0x8000
auto-mac=yes admin-mac=00:00:00:00:00:00 max-message-age=20s
forward-delay=15s transmit-hold-count=6 ageing-time=5m
Code: Select all
[admin@MikroTik] /interface pppoe-client> print
Flags: X - disabled, R - running
0 R ;;; PPPoE-Client T-Online: RED <=> Bridge PPPoE DSL <=> INTERNET
name="T-Online PPPoE via PPPoE-Bridge IPv4" max-mtu=1492 max-mru=1492
mrru=disabled interface=PPPoE Bridge
user="00*******************#0001@t-online.de" password="******"
profile=pppoe_ipv4 keepalive-timeout=60 service-name=""
ac-name="*******" add-default-route=no dial-on-demand=no
use-peer-dns=yes allow=pap,chap
Modem 192.168.xxx.1 and RED 192.168.xxx.10...
Everytime I try to connect from WinXP-openVPN-Client (latest version), the PPPoE-Connection crashes ?
Do I have to put the PPPoE-Client on the DSL-Modem (is capable, but the wrong way, as I need the public ip on the mikrotik...) ?
Anyone got in success from implementing openVPN beside PPPoE-Client ?
Thanks in advance !
Greetz.......Detlef
